Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: XBCD drivers for Xbox 360 gamepad

05 Jan 2010   #21
NumberOne1337

Windows 7
 
 

I followed the guide you wrote Zorlac BUT.... now in the setup uti it says: Xbox 360 Controller and the controllers goes all crazy...

Here's what I can choose between: Bildr.no

I tried the Trigger as split axes but it doesn't work.. When I try a game no buttons at all work. I also tried some other but still buttons don't work?

I also tried the XinputTest in the installation folder C:\Program Files (x86)\XBCD\x360ce

Here's what that looks like: Bildr.no

I have no buttons at all pressed.. And if I press some buttons they're on totally wrong place also :S like start is on the right axis stick etc...

Need some help :S

If some of you is good and want to help me add me on msn: pontushultman_@hotmail.com
faster to help over MSN.


My System SpecsSystem Spec
.
05 Jan 2010   #22
squall leonhart

Windows 7
 
 

the Xbox tab is known/expected behavior. Its not 360 pad compatible currently.
What matters is the Windows Tab, and the behavior in the windows Calibration screen.
My System SpecsSystem Spec
05 Jan 2010   #23
NumberOne1337

Windows 7
 
 

Ok so here's problem 2:

I've now configured it, and when I look at the overview in XinputTest (C:\Program Files (x86)\XBCD\x360ce)

If I press down LT on the screen RT goes to 0 and if I push RT, RT goes to 255... So 2 buttons works as one and not two seperate oO
and when I push the right stick (not move it around, push it down) the start button gets activated... and when I push down left stick the back button gets activated..

And if I press start/back button the right/left stick gets activated.. so they got switched places.. how do I fix that?

Kinda annoying when I played PES10 and accidently pushed down the left stick and I came to the start menu...
My System SpecsSystem Spec
.

06 Jan 2010   #24
squall leonhart

Windows 7
 
 

Yes, this is expected behavior when you haven't set the control to the Split Axis or X360ce profile and then calibrated the controller.
once calibrated the triggers consider the half axis to be full range, starting at 0 and ending at 255.

You can access the device calibration via Devices and Printers, Right click the controller and select game controller settings.
My System SpecsSystem Spec
06 Jan 2010   #25
NumberOne1337

Windows 7
 
 

How do I put the x360ce thingy on? I see x360ce.ini in the installation folder of XCDB but I don't know how to put that on from the setup uti?
My System SpecsSystem Spec
06 Jan 2010   #26
NumberOne1337

Windows 7
 
 

Okay, so now I picked the XBCD 360 Emu and calibrated everything... everything seems right and start/back button is on the right ones when I'm in the XinputTest

So I tried to play PES10 and I run fast on the back button and switch players on the start button so there they're still ****ed up. Before I installed XCDB start button was run fast and back button was switch player...
My System SpecsSystem Spec
06 Jan 2010   #27
squall leonhart

Windows 7
 
 

The dropdown menu at the bottom left corner contains several predefined profiles.
My System SpecsSystem Spec
06 Jan 2010   #28
NumberOne1337

Windows 7
 
 

Yes I know, I found that.. But now you see I have new problem which I explained.

Also I tried to play The Saboteur now, it doesn't notice I have a xbox360 controller plugged, so when I press buttons nothing happend. Before I installed Xbcd it did notice the controller..
My System SpecsSystem Spec
06 Jan 2010   #29
squall leonhart

Windows 7
 
 

it must be an xinput only title

you must place the x360ce files (the xinput dll's and the cfg/ini file)into the games folder.
My System SpecsSystem Spec
06 Jan 2010   #30
NumberOne1337

Windows 7
 
 

Can you add me on MSN? pontushultman_@hotmail.com quicker over there..

edit:

So I should put these files:
http://bildr.no/view/561775

those I have marked

into all of my gamefolders that I wanna play? if so where in the gamefolders?

config or just the mainmap?
My System SpecsSystem Spec
Reply

 XBCD drivers for Xbox 360 gamepad




Thread Tools




Similar help and support threads
Thread Forum
My gamepad detected as Generic Usb Joystick, Not as USB Gamepad.
I bought Enter E-GPV10 Controller for PC. Usually gamepads connected to my laptop would be shown as USB Gamepad. But not this one. My games such as Ashes Cricket, Portal2, COD MW ignore this gamepad even when connected. Device Manager shows 'Human Interface devices' with two drivers 1. HID...
Hardware & Devices
XBOX S Gamepad: working signed driver
After a new install of Windows 7 on my new PC I was about to reinstall the unsigned XBCD 0.2.7 drivers for my old XBOX S gamepad when I decided to search the web a bit and found this entry: HowTo get the Xbox Controller S working in Windows 7 (64-Bit) Pictures and Code According to that...
Gaming
xbcd xbox controller windows 7
NOT 360 controllers. I was able to run xbox (NON 360) controllers with xbcd.dll drivers. in windows xp. they do not seem to take effect with windows 7. X_x.... Anyone know what I need to do ?
Gaming
Xbox 360 GamePad wired/wired PC version difference?
Could anybody here tell me if there is a difference between the standard wired Xbox 360 control and the one labelled as being for both PC and Xbox 360, just the prices are slightly different? Here are the two I mention: Standard Xbox 360 Wired Wired Gamepad - Black (Xbox 360): Amazon.co.uk:...
Gaming
Problems with signatures in the gamepad drivers
I have an acteck AGJ 3350 gamepad. Lost the disk so I just dowloaded the drivers from the companies website and win7 doesn't recognize them and recalls the pad as a troubled hardware.
Drivers
Standard gamepad driver for Gravis Gamepad Pro USB?
Hi, I've got a Gravis Gamepad Pro USB and although a device is detected when I plug it in, it fails to install a driver. I can't find any Windows 7 x86 drivers on the net so I believe that I have to use some kind of standard HID driver to get it working, although I'm not sure which one. When...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:33.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App