Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: WinTV HVR 900 Help

19 Jun 2010   #1

Windows 7 build 7137
WinTV HVR 900 Help

I'm on netbook asus eeepc and i have win7 starter. On my hybrid tv tuner the lamp isn't on but i installed drivers successfully. How can i get it working and what is the best program which can work on netbook??

My System SpecsSystem Spec
20 Jun 2010   #2

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1

Was the HVR900 a retail box? If so, did you install the WinTV software?

The device driver will make the device be recognized and work within Windows, but you need the software program to actually use it.

Hauppauge recommends that you install their software to set up and configure the device, even if you are going to use another program (like Windows Media Center or SageTV) for watching and recording.

You can go to the Hauppauge website and download WinTV to install if you do not have a CD.
My System SpecsSystem Spec
20 Jun 2010   #3

Vista 64 Ultimate, Windows 7 64 Ultimate, Ubuntu 9.10

An earlier installation instruction set and installer can be found at the Hauppauge site here Windows Media Center Support for Hauppauge WinTV products even if it is not up to date it should get you activated and run an update.
My System SpecsSystem Spec

21 Jun 2010   #4

Windows 7 build 7137

I got it working somehow... I used powercinema software... But thanks anyway
My System SpecsSystem Spec

 WinTV HVR 900 Help

Thread Tools

Similar help and support threads
Thread Forum
Can't run WinTv Xp on Windows 7 32-bit
Basically I found a good working TV tuner in my Uncles basement and have hooked it up to my HP-Pavilion a6020a and I need drivers for it but there are so many and my Tuner is basically UN-named. Could someone please help me fix this with some sort of bulk driver software? Thanks in advance, Rangi.
WinTV PVR 350 on Windows 7 x64?
Has anyone had any luck running Hauppauge WinTV PVR 350 (or 250) in Windows 7 x64? I'm running build 7068 by the way. I've tried installing the drivers regularly, in XP Compatibility Mode, and in Vista Compatibility Mode without any luck. I've also tried installing the latest WinTV 7 using the...
Hardware & Devices
Problems with WinTV PVR 150
Hello there. I have a WinTV PVR 150 card and it was working fine in Windows XP. However, since I installed Windows 7, the visuals are grainy and the audio is missing on the channels that don't have static. Those that have static do play the static sound. It seems to be a driver problem, but...
WinTV V6
I am trying to run WinTV V6 on my computer after recently going from Windows XP to Windows 7. The thing is, WinTV V6 worked beautifully on XP - no problems at all. But now I've gone to 7 and now it's playing up a bit. I can install the drivers and the program as usual, and it can work fine...
Hauppauge WinTV-HVR-2250 HELP !
:( So I went ahead and purchased a Hauppanuge 2250 Media Center Kit and am having an issue setting up the channels. After having it recognized my remote (which it couldnt) I had to enter in the digits 1 by 1 till it learned my STB remote. Then when it asks to have me change the channel with the...
Media Center

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:21.
Twitter Facebook Google+