Could you list the RAM modules you are using and your FSB speed? Reason for asking is looking at the compatibility charts for your mobo and while the e7400 is a 775 socket CPU it is not listed in the Abit CPU compatibility reports but the e7200 and e7300 are. Just trying to see if you have anything that can pinpoint something, thanks.
I have the Abit IP35-E, that CPU is compatible with the last BIOS version released. All 45nm Core 2 processors are.
just a small thing, Over Clocking will harm the CPU right? cuz i kinda get confused with those stuff, and where to find it? cuz after i changed my MotherBoard to MSI i got lost in BIOS settings.
Hi,
I've had my laptop since 2012. I've always had updates set to "Check for updates but let me choose whether to download and install them."
Up until 2014, I installed every update listed under "Important".
In May 2014, I installed KB2952664, it caused problems (can't remember the...
I did benchmark on my WD Blue 1TB a month ago with read and write around 135mb. Today i ran benchmark again and now read and write is down to 99mb. WTH is going on?
i have ran wd diagnostic on my hdd and its healthy. Does it have anything to do with how full hdd is? I only have about 70gb left,...
Hi my win 7ultimate 64B with a gigabyte Ep41T-UD3L MB has slowler & slower starting up from a cold start
Takes up to 30M to even get to bios
But If tumned off for no more than 5mins, starts OK immediately I have tried different memory slots but no difference
There is also a slight whine...
I have a problem with my Hitachi 3tb duo pro drive external hard drive. As i put more files it seems to get slower in one folder. An example is today, the access speed to find a patients name in it ( about 6k folders) would take about 30 secs. Before that it would only take 10 seconds and when i...
Hey guys,
Today I switched from 32-bit Windows 7 to 64-bit Windows 7, I have a 64-bit processor and 3GB of RAM, I know I technically couldve stayed on 32-bit but I thought well what the hell, I could do with formatting anyway. So I did it, and now it seems to be going just as slow as before on...