Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: lexmark x1270 all in one printer

13 May 2009   #1

windows 7 ultimate
lexmark x1270 all in one printer

my lexmark x1270 all in one printer will not print, i have windows 7 utimate build 7100, can anybodt help, i assume it will be the drivers, not sure?
My System SpecsSystem Spec
21 Jul 2009   #2

Windows 7 and XP (Dual boot)

Hi Grahame. Check out this link.
Lexmark 2500 drivers for Windows 7 RC Build 7100 - Vista Forums
I have an x1150 that wouldn't work with Windows 7, but with the Vista x64 driver it would (and I am running windows 7 x86)!
That was found after a google search, but unfortunately, is on a Vista forum instead of here where it is most needed.
My System SpecsSystem Spec
21 Jul 2009   #3

Windows 7 64-Bit Build 7100

It is important to note that Microsoft was smart about the driver issues. Almost all vista drivers will work on Windows 7 for most devices. Sometimes you must run the driver installation under Windows Vista compatibility mode. Worked for my G5 Laser mouse.
My System SpecsSystem Spec

22 Jul 2009   #4

Windows 7 and XP (Dual boot)

MasterMegaManX-when I first tried to install my driver I did it in Compatibility mode (using a Vista 32 bit driver). It worked, but there were some issues (my printer kept saying there was a paper jam when there clearly wasn't- annoying to say the least!)
I still have some issues and found that there is one feature with the printer that isn't working with Windows 7, but it's not a big deal.
I am sufficiently happy with Windows 7 that I can handle a few driver issues.
My System SpecsSystem Spec
04 Nov 2009   #5

Windows 7

I had the same issue. I followed instructions from another post: download Vista 64 drivers from Lexmark, rename .exe to .zip, extract files to separate folder, change compatibility mode on the setup.exe to run as Vista app, save that setting and run setup.exe as Administrator.
My System SpecsSystem Spec

Thread Tools

Similar help and support threads
Thread Forum
Lexmark X1270 on Windows7 - "Preparing Lexmark all-in-one for first.."
I have Win7 Pro SP1. During install of the 32bit driver file cjb1200Win7en.exe I get the following message: "preparing lexmark all-in-one center for first use. searching for scanning applications.. please wait." Followed by "AIOC.exe not responding", which forces me to shut the...
Driver for my Lexmark Z25 printer
I recently bought a Lexmark Z25 printer second hand but I'm struggling to find a driver download for Windows 7. If anybody could help it would be much appreciated! :)
Lexmark X74-X75 printer :-)
Hi all, I am not having any issues with the Lexmark printer just wanted to share some surprising info: For giggles I decided to see if Windows 7 could use this printer as a network printer. The Lexmark printer is hooked up to a Compaq XP Pro desktop. Since all my pc's see each other...
Hardware & Devices
Lexmark X73 Printer
Has anyone successfully installed a Lexmark X73 printer on Windows 7 or know anything about the drivers?
Hardware & Devices
No Lexmark FAX Printer
When I install the drivers for the Lexmark X9575 AIO printer on XP or Vista (x64), it also installs a Lexmark FAX printer which I can use from Word or other programs to automatically send a FAX from my PC. I now have Win 7 x64 RTM installed and there's no Lexmark FAX printer listed. I tried...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 18:02.
Twitter Facebook