Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD during clean install

30 Jul 2010   #1

Windows 7 Home Premium (hopefully soon)
BSOD during clean install

I did a search but could not find a post about this exact error

I'm trying to do a clean install of Windows 7 Home Premium (full) on a Dell Dimension 9200 desktop that currently has no OS (it had XP but a file in system32 is corrupt and it won't run). The setup goes normally, but about a minute after it reboots at the "completing installation" stage, my computer stops making noise and it seems to idle at this screen for about five minutes, then I get a blue screen for about a half of a second (not long enough to even see what the error is) then my computer reboots again. After this, it shows the windows 7 load screen, then I just get a black screen that lasts as long as I leave my computer on.

My computer's specs are:
Core 2 Duo 2.13 ghz processor
2 x 2 GB DDR2 667 mhz RAM
BFG Nvidia Geforce 9800 GTX+ OC

I've tried disconnecting all unnecessary hardware, as well as deleting my old partition and creating a new one and formatting it.

Thanks in advance

My System SpecsSystem Spec
30 Jul 2010   #2
Bare Foot Kid
Microsoft MVP

W 7 64-bit Ultimate

Hello TC90, welcome to Seven Forums!

To start sorting the hardware, download and burn to CD (better on CD) Memtest86 then boot from the disk and let it run at least 2 full passes, as a start, to check the RAM, then we can go on from there; have a look at the link below and be sure to post back with the outcome.
Also in advanced boot options select the "Disable Auto Restart ... " option so maybe you can get the error text when next it BSODs.

Memtest86 Memory Diagnostic
My System SpecsSystem Spec
31 Jul 2010   #3

Windows 7 Home Premium (hopefully soon)

I can't even get to advanced boot options... I press f8 and nothing happens, I just get to the windows error recovery screen (which I get to even without pressing f8)

As for memtest86, I'm going to try that tonight when I get home, but I already did a windows memory diagnostics test and let it do 6 full passes and I didn't get any errors
My System SpecsSystem Spec

31 Jul 2010   #4

Microsoft Community Contributor Award Recipient


Also Check your HD.
1) Boot DVD, & Press Shift+F10 (for command prompt)
2) Boot DVD, & Command Prompt at Startup (for command prompt)
Open an command prompt.
In the command prompt, type chkdsk C: f/x/r/v and press Enter.

Disk Check
Check Disk - chkdsk - Vista Forums

Check Disk (chkdsk) - Read Event Viewer Log

Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
My System SpecsSystem Spec
01 Aug 2010   #5

Windows 7 Ultimate Retail Box (64-bit installed) + Service Pack 1

I suspect your keyboard is disconnected if F8 doesn't bring up anything that is... or that indicates Windows aint installed properly if no BOOT menu can be had.

As something else to try, I'd burn a flavor of Linux that can be fully run off the CD, and see if that will run on this PC in question, if it doesn't, you have a major hardware failure, atm I'd be swapping out it's HD and trying install on another.
My System SpecsSystem Spec

 BSOD during clean install

Thread Tools

Similar help and support threads
Thread Forum
Clean install more BSOD than before
I'm getting a lot of BSOD. Hopefully the log files will help. Driving me crazy. I just replaced the hard drive as it failed diagnostics.
BSOD Help and Support
Various BSOD after clean install
Please Help I have had to re install Windows 7 64 bit today on a clients PC. Since the install has completed i have had various BSOD including SYSTEM_SERVICE_EXCEPTION NTFS_FILE_SYSTEM and just now BAD_POOL_HEADER
BSOD Help and Support
BSOD 41(63), Second clean install
Win7 Pro x86 (32-bit) Original installed OS OEM Age of system (hardware): 2010 December Age of OS installation: Two days I did complete SFC /SCANNOW without any errors. I've run a diagnostic on the memory that didn't turn up anything and my case is running cool. I have several others from...
BSOD Help and Support
Clean Install BSOD
Hi folks, Just did a clean install of Win 7 pro edition, 64 bit on my machine. Came home to find, 'my system has recovered from an unexpected shut down...' On the clean install I have made sure to update all mobo drivers as well as graphics card drivers so I think I am up to date there. ...
BSOD Help and Support
BSOD even after clean install
Sorry if this has been posted before but I get the BSOD randomly I've attached the minidump file If someone can help I truly would appreciate it I've tried uploading the zip file don't know why it isn't here? thank you!
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:45.
Twitter Facebook Google+