Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 with Raid Failure

17 Aug 2010   #1
csmith10

windows 7
 
 
Windows 7 with Raid Failure

My system crashed on bootup. I was booting off my RAID. All 3 disks say error. When I try to install Windows 7 and repair it won't let me load the nvidia drivers. The nvidia drivers are .exe installations. Does anyone know where I can download the normal nvidia drivers to install?


My System SpecsSystem Spec
.
17 Aug 2010   #2
Hipster Doofus

Windows 7 Pro x64 -- PCLinuxOS KDE4 FullMonty 2011
 
 

Maybe it's a hardware problem. Make sure all the connections are snug.
My System SpecsSystem Spec
Reply

 Windows 7 with Raid Failure




Thread Tools




Similar help and support threads
Thread Forum
Hybrid RAID 5 Failure after cleaning
Good morning SevenForums, long time no speak ! It's been a few years since I've posted on here, just spent my time getting answers lurking :) In my latest PC build I have added a Hybrid RAID 5 using 4x 2TB 7200 Seagate drives. They have been running absolutely fine without any issues.. until...
Hardware & Devices
RAID - deleted RAID array, Windows 7 ok but I have questions
Hi all, My RAID 1 (I think? I have two equal drives that are mirrored) array was causing me a lot of pain. It kept freezing up my system and having me to had to rebuild the RAID too often. After a number of tests and browsing info online, I've decided that the RAID was the culprit of the freezing...
Hardware & Devices
Converting to Raid 0 Windows 7, NOT Hardware Raid 0
I have tried to find the way to do this, but without success as I cannot see the wood for the trees. Any help or URL would be welcome. I have a mature W7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to...
Installation & Setup
Windows 7 System Image - Restore Non-RAID to RAID 0+1
I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes...
Backup and Restore
Disk Boot Failure with RAID 0 Array
Hi I have two 500Gb SATA drives in a RAID 0 config set as my system drive 'C', and a 1TB SATA as a storage drive 'E' Never had this problem until last night when I removed the storage drive. Tried the usual fixes with no luck, put the drive back in and the system boots normally. The...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App