Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Help needed in Raid setup.

05 Sep 2010   #1
amigo max

Windows 7 Ultimate x64, # Windows Vista Home Premium 32bit
Help needed in Raid setup.

Hey guys, I want to setup a raid 0 configuration with 2 320GB SATA HDD's.
And for extra i even want to keep my old 500GB and 640GB as storage. (no raid for them.) I dont know what to do, I'm totally a Newcomer in that. Can i be offered with advices on how to do it?
Thank you.

My System SpecsSystem Spec
05 Sep 2010   #2

Win7 HP (x64)/Win7 Ultimate (x64)

Hi Amigo

Does your motherboard support RAID or will you be using an addon RAID-Controller?

My System SpecsSystem Spec
05 Sep 2010   #3
amigo max

Windows 7 Ultimate x64, # Windows Vista Home Premium 32bit

I have a raid controller card which i'll be using.
My System SpecsSystem Spec

05 Sep 2010   #4

Windows 10 Education 64 bit

My Silicon Image RAID card has it's own BIOS. During the PC's boot up I'm prompted to hit F2 to enter the raid setup. The manual for your card (that may be on the driver disk) will tell you how to setup the array. You may have to load the drivers during setup too. Windows 7 will prompt you for them if it doesn't have them. Once the array is setup it will appear as one disk to windows. You will have to set the boot order in your motherboards BIOS as well.
My System SpecsSystem Spec
13 Sep 2010   #5

Windows 7 Ultimate x64 and Home Premium x64

I would not recommend a Raid 5 setup for him as he has a 500 and 640 gig Drive. He would be wasting a good amount of space having them coupled with his 2 320 Gig drives.

I would also not recommend him using a Raid 0 setup. Raid 0 is what is called a 'striped' set. This means data would go like this:

Disk 1 Disk 2
A1 A2
A3 A4
A5 B1
B2 B3

If disk 1 fails, you lose data. If disk 2 fails, you lose data. In an OS situation, this is VERY bad.

Raid 1 is the recommended way of surviving things:

Disk 1 Disk 2
A1 A1
A2 A2
A3 A3

The drawback of this, you use up a disk to mirror the other disk. This is good for situations when one drive goes bad... And given you mentioned wanting to do Raid 0, I highly suggest you do not go this route, it will be very problematic for you.

And the only reason I say don't do Raid 5, while I have been in discussions with others say it isn't nearly as bad performance wise, I also find that using a 500 Gig and 640 gig drive as part of a Raid 5 Storage array when your other two drives are 320... you are losing, effectively, 500 gigs of usable space, not counting the fact that you will also lose another 320 to be part of the parity space. That's 820 gigs you lose just to get about roughly 960 Gigs of disk space with redundancy. With a RAID 10 setup, yes, you lose equal to what you will get for redundancy and performance, but to be honest, if you are going to do a RAID 5 setup, you really want to only lose 1 disk drive worth of space, or basically 1/N worth of space if you only use same size disks versus 1/1 which is what you are going to get doing that way.
My System SpecsSystem Spec

 Help needed in Raid setup.

Thread Tools

Similar help and support threads
Thread Forum
RAID Setup - Alienware - A few setup questions?
I have just finished moving my OS from a 3TB hard drive to an SSD. I now have 2 matching drives that I would like to set up as a RAID array. A couple of questions: 1. Do I need to backup the data that will be on the RAID before setting it up and then move it back once it has been setup? 2. Do...
Hardware & Devices
Win 7 RAID 0 help needed.
Ive read alot of posts on here but nothing that is specific to the setup im trying to do plus ive only ever done a RAID on XP and im having some issues using win 7 64 bit. I have a Gigabyte GA-990FXA-UD3 mobo and 2 64GB SSD HDs i want to set up as RAID 0. Ive downloaded the drivers for it but...
Installation & Setup
One SSD + 2 HDD in Raid 0 setup
Hello users, My mobo is a Asus P6T deluxe v2. I got one OCZ Agility 3 120gb SSD for OS, and I want my two other HDD Hitachi 500 GB in Raid 0. Is that possible? If it is possible, how?
Hardware & Devices
Win 7 raid 0 setup / missing raid controller driver
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
SSD Raid-0 setup
Hey everyone, can you help me out please? I am thinking of buying SSD disks and maybe into a raid-0 config with 2 disks (thinking of these OCZ 30 GB OCZ OCZSSD2-1VTXT30G). My MB (Asus M4N-72E) should support RAID, but does it work with SSD? Or do I need a special adapter? Thnx for...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:27.
Twitter Facebook