Major Problems, Please Help

Im fretting right now, i think i may have just made my SSD and HDD unusable.

Ok: I have a new build, was messing around with the set-up to try and get it to work the best, trying different install and with dynamic/basic hdd's.

So somehow this is the situation i have:

1Tb HDDwith the OS on, dynamic drive,
80Gb SSD partitioned, with the 100mb system restore as one and nothing on the other, also dynamic.

I want both to now be basic drives with the OS on the SSD, but i cannot do it!! Under no cicumstance, right clicking in the grey area where it would normally be highlighted, its a locked option for both drives.

I cannot format the SSD because the 100 mb is there and cant be deleted, and because of that partition it cant be made basic again.
I cannot make the HDD basic because the OS is on there,. Is there anyway of doing a completely hard reset of the hard drives, because so far i cannot find a software fix for it. Kiund of like a factory restore, nothing has to survive on any disc, just windows will not let me do anything with them.

any hel would be appreciated, im tearing my hair out here.

ok, i unplugged the 1TB with the OS on, set the BIOS to boot the SSD first, which only has the 100mb artition on and nothing else. I then booted from the DVD drive and it has gone into the windows 7 installation screens.

I cannot install windows on either of the 2 partitions it shows:

Disk 0 Partition 2 84.0MB Total Size 70Mb Free Type SYSTEM
Disk 0 Partition 3 74.4GB Total Size 74.4GB Free Type DYNAMIC

Formatted both, cannot delete either partition.

Reason for not being able to install on the large partition:
Windows cannot be installed to this hard disk space. The partition contains one or more dynamic volumes that are not suported for installation.

Did you see the step to wipe the SSD first?

Before using Diskpart Clean All command to overwrite all code, you'll also need to convert it back to Basic as it should have remained using convert basic command: http://technet.microsoft.com/en-us/l...15(WS.10).aspx

sorry i missed that!
im doing the clean ssd now, didnt use the convert basic command though, will run it again afterwards and implem,ent that command.

thank you greg, its getting late here, so i wont be able to do this all tonight, will try again after work tommorow, and report back to you if theres anything else. (im sure there will be :))

again many thanks