Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 64bit Clean Install FAIL

04 Jan 2011   #101
Joshatdot

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by CJMore View Post
Still trying to get Windows 7 installed on either Sata HD. The Asus drivers didn't work.

Suggestions?
QUOTE=Joshatdot
~snip~

have you tried installing W7 from USB yet?
USB Windows 7 Installation Key Drive - Create
Install Windows 7 from USB Pen Drive Using Grub4Dos


My System SpecsSystem Spec
.
04 Jan 2011   #102
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

I still do not see this as needing SATA drivers Of all the win7 I have done so far, I have yet needed to load any SATA drivers. Just did an install on Dec 31st, on a 1tb Samsung SATA HD. I pre-formatted it as one big partition, on another computer. Wam, Bam, 20 minute install If the HD is pre-formatted, the win7 installer should not need to format it again, just copy the files & install.
With as many errors as you have had, it sounds like corrupted win7 install files, not the HD's!
I would find somebody with a win7 DVD, to borrow from, to try
My System SpecsSystem Spec
05 Jan 2011   #103
CJMore

Windows 7 Professional x64
 
 

Okay - Here's the current Status

I have installed Windows 7 from the original DVD to an old IDE HD.

I used the SATA DVD drive and MS Win 7 Dvd and successfully installed. However I am still unable to see the SATA HDs. In fact I borrowed a WD 80GB Sata drive and also was unable to see it.

I am in the process of running windows updates.

As of right now under device manager - Disk Drives - I have 2 listing
Disk Drive
WDC WD800BB etc

I am still unable to see the SATA HD.
My System SpecsSystem Spec
.

05 Jan 2011   #104
CJMore

Windows 7 Professional x64
 
 

After 50 updates and multiple reboots last night I have an "up-to-patch" Windows 7 install to a local IDE drive.

That said, I am now able to see the Seagate 500GB Sata drive as RAW. I am in the process of formatting the drive. This afternoon I will attempt a windows install to the local hard drive.
My System SpecsSystem Spec
05 Jan 2011   #105
CJMore

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Your mobo is reported faulty in numerous Google results, and it has an AMD chipset - not NVIDIA.

I saw your edit thanks for this info. When I was reseaching the issue it seemed there was a batch of bad broads produced last year/year .5 ago.

Unfortunately neither the box nor the board have a rev version that I could find. The info I found referenced CPU Parameter in the recall, did you see something referencing the SATA channel?
My System SpecsSystem Spec
05 Jan 2011   #106
CJMore

Windows 7 Professional x64
 
 

When I attempted to format Sata HD through device manager - formatting hung.

Then when i attempted to format via DiskPart I get an I/O error = Diskpart has encountered an error: The request could not be performed because of an I/O device error.
My System SpecsSystem Spec
05 Jan 2011   #107
CJMore

Windows 7 Professional x64
 
 

I am seriously spent....Now I can't even see the RAW SATA HD

Is it possible that I have received (2) Asus M4a79xtd evo motherboards? That is some seriously poor luck eh?
My System SpecsSystem Spec
05 Jan 2011   #108
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

This does sound really bad. What other brand of MB will work with your CPU, etc.
I have good luck with Gigabyte MB's, that what I just did on Dec 31st.


Edit:

your CPU CPU - AMD PHENOM II x4 945 3.0G AM3

should work with most any Gigabyte AM3 MB
My System SpecsSystem Spec
06 Jan 2011   #109
Joshatdot

Windows 7 Professional x64
 
 

+1 for Gigabyte MBs .. they are ROCK SOLID
My System SpecsSystem Spec
06 Jan 2011   #110
CJMore

Windows 7 Professional x64
 
 

Thoughts on a Gigabyte GA790XTA-UD4 ?

I'm like shell shocked here, second guessing myself all the way!!
My System SpecsSystem Spec
Reply

 Windows 7 64bit Clean Install FAIL




Thread Tools




Similar help and support threads
Thread Forum
Clean install Windows 7 Home Premium 64bit, driver help
Hello, I'm new to building and upgrading computers, so bear with me :confused:. I've searched through the forums on various sites and I'm still unsure about what to do. I'm planning on doing a clean install of Windows 7 64bit Home Premium on my computer with a brand new unused SSD. What I would...
Drivers
Windows 7 Professional 64bit Clean Install Still has the Error ID 6000
I have keep getting this same error but have no symptoms that anything is wrong. I have an Acer 7551. All the software that came with it has been removed except the e-power management and e-recovery programs. I've disabled everything that boots with windows and still get the error. Even in Safe...
Installation & Setup
9800GTX + Windows 7 clean install = fail
Hey guys. Prepare for a bit of a confusing post - I'm know to not make much sense sometimes ;)... Up until about a week ago my computer was happily running along until all of a sudden - POW! A good chunk of my games no longer launch. This happened to me back in the W7 beta and it was only...
Installation & Setup
Help Windows 7 64bit clean install
PC specs AMD Phenom II 965 3.4 GHz 4 GIG RAM 1.5 tb hard drive Hope someone can help. I am tring to install a OEM windows 7 pro 64 bit as a clean install it goes through all the setup and restarts several times but then after it restarts it gives me a screen that is I have done this several...
Installation & Setup
*HELP* Windows 7 64bit clean install
Hey guys, Im new to the boards and was hoping someone could help me out here. I have just got Windows 7 Home premium upgrade. Upgraded from XP and it would only let me instal the 32 bit version of windows 7. It says my computer is able to run the 64 bit version and I have been trying to do...
Installation & Setup
Win 7 64bit Install Fail (easy fix likely)
This will probably be easy for someone to help me with, and I'm gonna attempt another install when my new HDD gets here, I wanna use a second drive. Anyways, it installed, and everytime it got to the part where the welcome screen was juuuust about to show up, it would restart. Safe mode, every...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:06.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App