trying to do fresh install from usb

1. Set your PC to boot from USB via BIOS
2. Put the USB in and let it load until you get to this screen:
   
3. Once at this screen, press: (SHIFT+F10) to get a CMD window
   This image has been resized. Click this bar to view the full image. The original image is sized 738x386.
4. MAKE SURE YOU SELECT THE DRIVE YOUR INSTALLING WINDOWS TO NOT ANOTHER. In the CMD window, type in Each Command and Press <ENTER> Key as follows:
   
   DiskPart <ENTER>
   list disk <ENTER>
   select disk 0 <ENTER>
   clean <ENTER>
   create partition primary align=1024 <ENTER>
   format fs=ntfs <ENTER> (Will Take a While)
   assign <ENTER>
   active <ENTER>
   exit <ENTER>
   exit <ENTER>
5. After it completes, exit the INSTALL COMPLETELY and reboot.
6. Once you are back in, go about installing Windows just DO NOT ALLOW Windows to create a new partition, use the only one there.
   
7. Windows will now install

(Instructions found via hArLtRoN)

How long have you had this hard drive, the usual reason you get that message is because you are trying to install to a GPT partitioned drive.

If it is a GPT disk, it must be converted to MBR.

Convert GPT Disk to MBR Disk

That is the error if you're trying to re-install a windows 7 on a machine with a pre-installed windows 8 or 8.1 OS.

If someone could give you the link on the tutorial, i cant find it. :)

I didn`t think it had anythng to do with 8, not with that size drive.

Official Windows 7 SP1 ISO from Digital River « My Digital Life

WiNToBootic bootable usb drive windows vista/7/8 - Bootable USB | Bootable USB