Win 7 plus Win 7 on 2 partitions?

Page 4 of 7 FirstFirst ... 23456 ... LastLast

  1. Posts : 22,814
    W 7 64-bit Ultimate
       #31

    Marking the G: Windows inactive is not all that necessary since you are going to remove the G: shortly, it is just the best course of action.

    You can use this excellent little app to retrieve the activation key from G:, just install it to the G: Windows and it will list the key; actually it can be installed and will run from a USB stick, it's a great, free little app.

    SIW - System Information for Windows


    After you have retrieved the key from G: and are ready to activate the 'new' Windows 7, in the 'old' Windows from an elevated command window type this command slmgr -upk that will remove the key from that install, you will get a conformation.

    The key can then be added to the 'new' Windows 7.

    How to Activate Windows 7


    Then when you're ready to remove G: Windows, use Partition Wizard to do a partition-specific wipe to that partition, have a look at Option Three of this tutorial for an outline of the wipe process.

    Partition Wizard : Use the Bootable CD

    Do not try to use diskpart as it will not do a single partition, it will do the entire HDD and it is not reversible once run.


    Do remember to keep us informed when you have the time.
      My Computer


  2. Posts : 31
    Microsoft Windows 7 Home Premium 32-bit, Service Pack 1
    Thread Starter
       #32

    One other thing ...


    Just one point that concerns me a bit. The partition maps are different, depending on which Win 7 installation I boot from - see attached maps. The System Reserved area has been assigned a Partition label in the case of the old Win 7 install, but not the new one. Should it have a separate label?

    I reckon I will finish all the installs by maybe Monday and will be ready to delete G: Win 7, so I am not motivated to spend much time on this if its's not critical.

    When Booted up from C: I have also started taking Drive Images of that partition, as I gradually install apps and tweak the settings. I figure I have a fail-safe approach by doing that.

    Cheers
    Adrian
    Attached Thumbnails Attached Thumbnails Win 7 plus Win 7 on 2 partitions?-booted-c-new-win7.gif   Win 7 plus Win 7 on 2 partitions?-booted-g-old-win7.gif  
      My Computer

  3.    #33

    What's important is how it registers in Disk Mgmt from your new Install.

    You appear all set to simply delete G in Disk Mgmt when you're ready.

    If a ghost listing still appears on a Dual Boot menu after deleting G, you can remove it from the Boot tab on msconfig. Just type msconfig in Start Search box to get there.

    You have 30 days to activate C so I would wait until I delete G to activate it with the 25-digit Product key on the insert in your Win7 DVD package. This is not the number labeled Product ID. If you have lost the insert with your Product Key then audit it before deleting G using Belarc Advisor. Belarc Advisor - Free software downloads and software reviews - CNET Download.com
      My Computer


  4. Posts : 22,814
    W 7 64-bit Ultimate
       #34

    All that matters is how the SysResv is listed in the "new" Windows 7, if it has a drive letter some programs/apps (or you) may try to write data there, that would cause all sorts of "low disk space" issues. This is what I wanted confirmation of when I asked for the snip of the "new" not the "old" Windows 7.

    I wouldn't "simply delete" the old Windows, that will leave all the old Windows code still there to maybe cause future issues and a format removes nothing; do the wipe I suggested above using Partition Wizard, that will leave the partition as "Raw" space that can then be deleted and recovered into the D: Data partition or it can be formatted and again used as a storage partition.


    As I stated earlier, you have 120 days to activate the new install.

    Activation Trial Period - Extend Up to 120 Days


       Note

    Contrary to popular belief, formatting does not remove any data at all, it just checks for sector errors and marks the space to be over-written as needed, all the data is still there including all the code from previous/failed installation attempts.
      My Computer


  5. Posts : 31
    Microsoft Windows 7 Home Premium 32-bit, Service Pack 1
    Thread Starter
       #35

    Bare Foot Kid said:
    All that matters is how the SysResv is listed in the "new" Windows 7, if it has a drive letter some programs/apps (or you) may try to write data there, that would cause all sorts of "low disk space" issues. This is what I wanted confirmation of when I asked for the snip of the "new" not the "old" Windows 7.

    I wouldn't "simply delete" the old Windows, that will leave all the old Windows code still there to maybe cause future issues and a format removes nothing; do the wipe I suggested above using Partition Wizard, that will leave the partition as "Raw" space that can then be deleted and recovered into the D: Data partition or it can be formatted and again used as a storage partition.
    Yep, got all your thoughtful advice in Win 7 plus Win 7 on 2 partitions? above and will follow those routines.

    Cheers
    Adrian
      My Computer


  6. Posts : 31
    Microsoft Windows 7 Home Premium 32-bit, Service Pack 1
    Thread Starter
       #36

    gregrocker said:
    What's important is how it registers in Disk Mgmt from your new Install.

    You appear all set to simply delete G in Disk Mgmt when you're ready.

    If a ghost listing still appears on a Dual Boot menu after deleting G, you can remove it from the Boot tab on msconfig. Just type msconfig in Start Search box to get there.
    Hi Greg, I think I will follow the Wipe routine in Partition Wizard when I am ready to lose the old Win 7 partition.

    [QUOTE
    You have 30 days to activate C so I would wait until I delete G to activate it with the 25-digit Product key on the insert in your Win7 DVD package. This is not the number labeled Product ID. If you have lost the insert with your Product Key then audit it before deleting G using Belarc Advisor. Belarc Advisor - Free software downloads and software reviews - CNET Download.com[/QUOTE]

    Belarc is a great tool - thanks for that. I ran it as well as SIW and it would seem that the Activation code is a 20 digit number in the format 00000-OEM-0000000-00000. I am amazed that I seem to have lost that as I am a meticulous person, but I am damned if I can find it in the Win 7 CD package!

    BFK's note to remove the activation code BEFORE wiping that old partition is something I would never have thought of!

    "After you have retrieved the key from G: and are ready to activate the 'new' Windows 7, in the 'old' Windows from an elevated command window type this command slmgr -upk that will remove the key from that install, you will get a confirmation."

    Cheers
    Adrian
      My Computer

  7.    #37

    The number you refer to is the Product ID because it has "OEM" in the string. This tells us it is an OEM copy of Win7 which means it either came pre-installed in factory or is an OEM retail copy of Win7 - both of which are tied to the motherboard they are first installed upon.

    If you look at the Belarc report, the Product Key should be the 15 digits with 5 groups of 5 character appearing just beside the Product ID you referred to.

    It isn't necessary to uninstall the Product Key if you are going to wipe the partition. You only need to do that if you want to change the key or put a machine in storage and use the key elsewhere.
    Last edited by gregrocker; 14 Jan 2011 at 09:32.
      My Computer


  8. Posts : 22,814
    W 7 64-bit Ultimate
       #38

    Hello again Adrian, good to see you're coming along so good.



    The activation key should look similar to this one below, 5 groups of 5 digits/letters.

    G0BUY-TH3S0-FTWAR-3ATMI-CS0FT



    The reason I suggested to remove the activation key from the old install and activate the new install before wiping the old one is so you can make sure you have no issues before you wipe the old.
      My Computer


  9. Posts : 31
    Microsoft Windows 7 Home Premium 32-bit, Service Pack 1
    Thread Starter
       #39

    Hi BFK/Greg. Well I remain confused about the damned Win 7 activation key. Here's what SIW reports in the "Licenses" section. I have changed some of the digits for obvious reasons.

    Windows Default Product Key 12345-ABCDE-74XYM-BH4JX-67891

    Windows PID 12345-OEM-8702121-67891

    Windows Product Key 12345-ABCDE-7B636-WT73F-67891

    The Belarc report just shows the last 2 keys. All very confusing.

    I can confirm that I bought a full OEM version of Win 7 HP and of course it's being installed on the same laptop/motherboard, so there are no licensing issues.

    As an aside I have installed Office 2007 on the new Win 7 and obviously was asked to input the Product Key. When I opened each application I was then asked to activate it - there was no request to enter any key for those, activation happened without that. I just don't remember what happened way back when I installed Win 7. It's something that happens SO infrequently (for me). I am very thankful of that!

    Man - I hate this stuff!

    Cheers
    Adrian
    Last edited by merlincorp; 15 Jan 2011 at 05:17.
      My Computer

  10.    #40

    Click Edit now, remove Product Key you posted.

    Triple check with Magic Jellybean to see which Product Key it confirms. It is likely the one Belarc audited.

    Safeguard your installed Product Keys for Windows, Office and other pricey software like you would a bank account number.
      My Computer


 
Page 4 of 7 FirstFirst ... 23456 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:30.
Find Us