Explorer can't see the RAID disk


  1. AFWilms
    Posts : 8
    W7
       New #1

    Explorer can't see the RAID disk


    I have a dual boot Vista and Win7 RC on one disk.
    2 other disks in Raid1.

    Downloaded the Beta Intel Matrix Storage Manager with the help from this site. TX.

    Now "My Computer" and "Windows Explorer" don't see the Raid disk.

    Intel Storage Manager; Win7 Disk Management; Win7 Defragment can see the Raid disk. Did even a defrag and checked the result via Vista: all fine.

    What's happening. TX

    PS: In Win7 beta the config was allright
      My Computer
    Quote Quote

  3. AFWilms
    Posts : 8
    W7
    Thread Starter
       New #2

    Sorry


    Found the answer in this forum.
    I should have wnadered around a bit more.
    Alfred
      My Computer
    Quote Quote

 

  Related Discussions
Hi everyone. Going crazy with this. So about 2 weeks ago, my "intel rapid storage technology" software gave me an error. I opened it and saw that one of the disks (2 disk array) in my Raid 0 array, had an error. I reset it back to normal and left it. Then I started to get pop ups saying that...
I have the motherboard Asus P7P55-M with the last update for BIOS ver 1101 Date 09/04/2012, CPU Intel i5 Core, RAM 6GB, Graphic Card AMD Radeon HD 5450, 1st device disk with OS WIN 7 64bit WD 160GB SATA, 2nd device Plextor PX-810SA SATA, 3rd device WD 640 SATA, 4th device WD 640 SATA. My...
Software raid 0 on Boot disk
in Installation & Setup

Hi, this is my first post in Windows seven Forums. I am building a laptop for college with two identical drives, and unfortunately no on-board raid controller. They are 2 120gb ssd's and I feel like they would be alot more useful as one drive rather than 2 small drives. I have Windows 7...
Hi I am new here, but I must already thank you for all the interesting info I have found here. I recently upgraded my computer and part of the plan was to use two 2Tb drives in a raid setup for my main windows drive. I see that it only recognises about half of the raid volume and the rest is...
Windows Explorer does not see my RAID 0. I have a new build with an Asus P6T Deluxe V2 mobo, Intel i7-920 cpu, and 12 GB of Corsair Dominators. During setup, I configured a RAID 0 with 2 new formatted but otherwise clean 7200 1TB Hitachi Deskstar SATA HDs. I then did a clean install of Windows...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 22:35.
Find Us