Question about Format/Quick Format

Page 1 of 3 123 LastLast

  1. Posts : 4,198
    Windows 10 Pro
       #1

    Question about Format/Quick Format


    Probably on upcoming Monday or Tuesday i'm going to upgrade my RAM to 4GB and going to buy a new Sound Card as well which will support the 64bit OS. I always use 2 sound cards. Than im going to install Win7 64bit version and install new updated softwares and gonna make a new system recovery image on the drive etc. I already made a backup of my data on an External Drive + DVD's. Now my HDD is already filled with unneccessary data which i dont need anymore and i'm also planning to make new partitions so my real question is should i do Quick Format or Format the Entire HDD and write 0's on it? :)
      My Computer


  2. Posts : 5,056
    Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
       #2

    Personally I always do quick formats. Unless you have an ageing hard disk and you need the format to scan for bad sectors, go for a quick format.
      My Computer


  3. Posts : 11,408
    ME/XP/Vista/Win7
       #3

    Personally, I do a Clean all & full format.


    SSD / HDD : Optimize for Windows Reinstallation
      My Computer


  4. Posts : 8,398
    ultimate 64 sp1
       #4

    myself, i prefer quick formats - because they format and they are quick. :)

    i've never had old data coming back to bite me after doing so.
      My Computer


  5. Posts : 1,436
    Windows 8.1 Pro x64
       #5

    I always did a full format to make sure i am keeping my disk clean, and working properly.

    Gamer
      My Computer


  6. Posts : 4,198
    Windows 10 Pro
    Thread Starter
       #6

    ummm now im confused it's like 50 50 votes ....
      My Computer


  7. Posts : 5,105
    Windows 7 Professional 64-bit SP1
       #7

    When I upped to 64-bit I did a full format but whatever you decide on boogieboy it will work :)
      My Computer


  8. Posts : 611
    Windows 8.1
       #8

    Quick Format just removes all entrys and most data, Sometimes you can reaccess data after a Quick Format. I Know from Experience xD. The main upside is that it is Quick.

    A Full Format will take time But erase the disk, Basically Factory Settings where it is blank.

    So if you dont wanna wait then go for Quick, If you wanna Make sure that the Data is Gone Completely Then Go for the Full.

    Hope this Helps.

    Oh i always quick format Thumb Sticks and Full Format HDD.
      My Computer


  9. Posts : 22,814
    W 7 64-bit Ultimate
       #9

    Doing either a quick or full format does not remove any data at all; the only way to over-write data is to do a wipe of the entire HDD; if you want the best possible space to do a real clean install to.
       Note

    Contrary to popular belief, doing a format with Windows 7 does not remove any data at all, it just checks for sector errors and marks the space to be over-written as needed, all the data is still there including all the code from previous/failed installation attempts.
    After you have copied out or made back-ups of the data you need to save to external media, use Step One of this tutorial at the link below to do a wipe (secure erase) to the entire Hard Disk Drive / Solid State Drive.
    • Then if you do not want to create the new Windows 7 "System Reserved" partition use the outline in Step Two #2 to create, format and mark Active a single 100GB partition to do the installation to.
    • If you do want to create the "System Reserved" partition use the outline in Step Two #3 to create, format and mark Active the System Reserved partition and then create and format the 100GB partition to do the installation to.
    Either way, running the "clean all" then creating and formatting the partition(s) using diskpart will get you the best possible space to do a clean install of Windows 7 to; you can always extend the Windows partition to include the remaining unallocated space on the HDD / SSD or create additional partitions after the installation completes if you choose.

    SSD / HDD : Optimize for Windows Reinstallation
      My Computer

  10.    #10

    Wipe the HD using the tutorial just above. Then you have no worries about bad code remaining on the HD.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:42.
Find Us