Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: So W7 troubles...

06 Jul 2009   #11
Cuzz

Windows 7
 
 
uPDATE...

I got the iso file to burn to DVD+RW...load it up, and opens the NTI CD-DVD Maker program...Im lost


My System SpecsSystem Spec
.
06 Jul 2009   #12
Brink

64-bit Windows 10 Pro
 
 

Hello Cuzz,

I'm not sure what this is an update to? You should post it in the original thread as a reply if you wanted to update it instead.


You can use the free program ImgBurn to burn the ISO to DVD. This guide at their site will help show you how to. Just select the Write Image file to Disk option, and select your ISO file (Soure) and DVD drive (Destination). Next, click on the icon at the bottom to burn.

Hope this helps,
Shawn
My System SpecsSystem Spec
06 Jul 2009   #13
Orbital Shark

 
 

I think this belongs as an update to So W7 troubles...
My System SpecsSystem Spec
.

06 Jul 2009   #14
Brink

64-bit Windows 10 Pro
 
 

The posts have been moved here now.
My System SpecsSystem Spec
06 Jul 2009   #15
Cuzz

Windows 7
 
 

Ok, lemme rephrase

Got the ISO file to burn to DVD, now how do I open it? I used the program image burn and Im stuck...
My System SpecsSystem Spec
06 Jul 2009   #16
Orbital Shark

 
 

The DVD should 'Autorun' when you insert it. You may need open 'Computer' from the start menu & double-click your CD/DVD drive, this will either run the setup file or open the drive so you can run the setup.exe file.
My System SpecsSystem Spec
06 Jul 2009   #17
matt_0978

Windows 7 Ultimate 64Bit
 
 

sounds like he's just put the .iso file on a dvd rather than burning it as an image.

i gots got windows 7e build 7264 64bit if anyone wants it
My System SpecsSystem Spec
06 Jul 2009   #18
Cuzz

Windows 7
 
 

Quote   Quote: Originally Posted by matt0978 View Post
sounds like he's just put the .iso file on a dvd rather than burning it as an image.

i gots got windows 7e build 7264 64bit if anyone wants it

exactly
My System SpecsSystem Spec
06 Jul 2009   #19
Orbital Shark

 
 

Ok, now we've established what's gone wrong.

You need to run ImgBurn and open up the ISO file, then, burn to DVD. Instead of having a single ISO file on the DVD you will have the contents of the ISO on DVD & it will be bootable.
My System SpecsSystem Spec
06 Jul 2009   #20
Cuzz

Windows 7
 
 

How? I opened up imgburn, then the file to burn, but Im going to be afraid it will not copy contents
My System SpecsSystem Spec
Reply

 So W7 troubles...




Thread Tools




Similar help and support threads
Thread Forum
SSD Troubles
I am truly stumped. I am trying replace my C drive with an SSD. I purchased a Samsung SSD 840 Pro, 256 GB. The install was straight forward, I used Samsung's Migration software to clone the OS onto the new drive. When I disconnect the old C Drive and try to boot from the SSD, the machine will...
Hardware & Devices
VPN troubles
Hi, i recently upgraded from XP to 7 ultimate on my PC, and after doing so I can't get my VPN (windows native software) to function. I can connect from my laptop (also windows 7 ult) to my PC and do get a VPN connection, but the PC does not appear to give me any IPv4 or IPv6 access (IPv4: not...
Network & Sharing
Ram Troubles
Alright, here's the rundown: I have 3GB installed and working. I add a 2GB Stick into the open slot, turn my computer back on, check properties of My Computer, and it says 5GB installed, 3GB Usable. Can anyone explain this? I am running Windows 7 Pro, 32-bit. Much thanks.
Hardware & Devices
RAM Troubles
I have here an Acer Aspire T180-UB7Z, and it has a stick of RAM that isn't listed on the RAM manufacturer's website as being compatible with the motherboard. I don't know if this is because they haven't tested this particular stick with this motherboard, or if it is incompatible. Basically, no...
Hardware & Devices
Log on troubles
I have an unusual situation. I have a normal logon screen with four users, call them A, B, C and D. Once the computer enters sleep mode, when I rewake it, instead of going to the general login screen, it automatically logs on user C regardless of the fact that all users were loged off before it...
General Discussion
WMP12 troubles
Im having trouble starting wmp, Whenever i try to start it a screen flashes for less than a second. It acts like it wants to start but it crash...is there any way i can fix this?
Music, Pictures & Video


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:02.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App