Software raid 0 on Boot disk

Hi, this is my first post in Windows seven Forums.


I am building a laptop for college with two identical drives, and unfortunately no on-board raid controller. They are 2 120gb ssd's and I feel like they would be alot more useful as one drive rather than 2 small drives. I have Windows 7 professional x64

After doing a ton of research, I believe it is impossible to boot Windows 7 from a software striped array, correct? The only thing I have found to combat this is "Native VHD Support". Unfortunately I don't understand VHD at all. Is this exactly what I am looking for?

My only other option (as far as I know) is to install windows 7 onto as small a partition as possible on one of the drives, and then stripe the rest of that drive with the other drive. The only real problem I have with this is I have used a computer with a small drive and a storage drive before, and it is very annoying, 1 drive is much simpler. Is it possible to move many important (and large) windows files onto a secondary drive (the striped array in my case) and "convince" windows that the "D:" drive is the OS drive? essentially have everything naturally install to, be on, and run from the "D:" drive?

Better yet is it in any way possible to run a small program pre-windows boot that will software raid the 2 drives? Or can Windows set up the software raid, and then boot from said raid array?

Basically I have 2 drives, no hardware raid controller, and I don't want the hassle of having to deal with 2 drives, 1 is much easier (and faster and a more useful size). I want everything on the software raid array (or as close to everything as possible) Whats the best way of accomplishing this?

Thanks!

derekkg2 said:

Whats the best way of accomplishing this?

Thanks!

Don't. You're not going to gain much speed increase, especially if you try a software solution.

If you want a little more speed, see if your laptop will can use a SSD. Go that route if it does.

derekkg2 said:

They are 2 120gb ssd's and I feel like they would be alot more useful as one drive rather than 2 small drives.

They are ssd's, The speed increase is a nice plus, but I'm mainly doing it because I want to combine their space

I personally would stay away from RAID, as it seems to more problems than it is worth.

theog said:

I personally would stay away from RAID, as it seems to more problems than it is worth.

Not always; it depends on the reason and use. In this application, I wouldn't use it.

derekkg2 said:

derekkg2 said:

They are 2 120gb ssd's and I feel like they would be alot more useful as one drive rather than 2 small drives.

They are ssd's, The speed increase is a nice plus, but I'm mainly doing it because I want to combine their space

Sorry I didn't read that (guess it was too late and I was too tired). Use one as the boot drive and replace the other with a larger (slower) drive.

I know this thread is a few months old, but in case anyone else searches and finds this.

A better solution would be to use Windows' Dynamic Disk function rather than RAID. You can make a logical partition span more than one drive, thus combining multiple drives to appear as one under Windows. However it still has the drawback of concatenated RAID (or RAID JBoD) in that if one drive fails it all fails.