Using SSD for OS with ASUS P8P67 MB


  1. Posts : 8
    Windows 7 Professional 64bit
       #1

    Using SSD for OS with ASUS P8P67 MB


    My computer contains:
    ASUS P8P67 MB
    Intel i5 2500 CPU
    16GB Corsair RAM
    3 WD Black 1TB SATA III HDDs, two configured as RAID1 for data and one for OS
    LG Blu-ray burner
    LG DVD RW drive
    Media card reader
    Windows 7 Professional 64-bit OS

    I just purchased a Corsair 128GB P128 SSD that I want to use for the OS, using the non-RAID 1TB HDD for backup for the RAID1 drives after moving the OS and any data files to the RAID drive. I'd like to put as much user data and app data as possible on the RAID drive, using the SSD only for apps and OS, and I also have questions about how to best use the six SATA ports on my MB (4 are SATA III, and 2 are SATA 2). The P8P67 has two Intel SATA III ports and two Marvell SATA III ports. I have my Blu-ray and DVD drives connected to the SATA 2 ports and the RAID is using the two Intel ports, with the third HDD on the Marvell port. My intent is to put the SSD, which is a SATA 2 device, on the second Marvell port, but I'm concerned that the Marvell port might not support TRIM for the SSD. I'd appreciate comments on my strategy and recommendations for how best to use the hardware I now have to work with, including the SSD.
      My Computer

  2.   My Computer


  3. Posts : 8
    Windows 7 Professional 64bit
    Thread Starter
       #3

    Good general tutorials, thank you, but I still would like input from someone familiar with the P8P67 MB about which SATA ports to use. I've read that the Intel ports support TRIM for connected SSDs, but I don't know if the Marvell ports do that, or if the SATA 2 ports use drivers that support TRIM. I'm also curious as to what amount of control I have concerning where on my computer various things get stored. The SSD will be my C: drive, and I don't generally want much stored there other than the OS and apps such as Adobe CS4, browsers, and such. For example, can I move the Users folder off of C: onto D: and have all the stuff that normally hits the C: drive end up on D:? I suspect that might be something I can define in Environment variables, but I'm not sure about that.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:13.
Find Us