Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 0x80070570 install error

20 Feb 2012   #11
redderz

Windows 7 Ultimate x64
 
 

Ok, I have confirmed that I get a similar flavored problem when trying to install sp1 for win7 ult 64 bit.

If I have 6gig tam, both windows update and network install of sp1 will give me error 0x8007000d data_invalid_error.

If I take out the 2x 1gig sticks to install sp1, it installs without problem.

Moral is yes, removing ram from pc will fix error 0x80070570 on fresh install of win7 ult x64 but you will also need to remove the ram to install sp1 either via win update or network install to avoid error 0x8007000d.

I am even tempted to leave my system on 4g ram till I can get my hands on 2 x 2g ram to go from 6 to 8 gig ram. I think if I try to install with 8g it would be ok. If not then go down back to 4g and if not again go down to single channel and just have 2 g ram on install.

Regards,


My System SpecsSystem Spec
.
20 Feb 2012   #12
gregrocker

 

Why are you installing Win7 and then SP1. Use the latest official Win7 installer with SP1 to save hours work.
My System SpecsSystem Spec
20 Feb 2012   #13
redderz

Windows 7 Ultimate x64
 
 

Because I don't have a copy of win7 with sp1 unfortunately. Good chance to get the ironing done while sp1 installs ;-)
My System SpecsSystem Spec
.

20 Feb 2012   #14
gregrocker

 

There are many other reasons besides wasted time why you want to install the lastest Win7. What is your licensed version?
My System SpecsSystem Spec
20 Feb 2012   #15
redderz

Windows 7 Ultimate x64
 
 

Win 7 ultimate 64 bit
My System SpecsSystem Spec
20 Feb 2012   #17
redderz

Windows 7 Ultimate x64
 
 

Thanks for that, I'll make sure that I put that to good use for next time. Just finished the vanilla install. It's not so bad time wise - 2 hrs.
My System SpecsSystem Spec
20 Jan 2013   #18
JMGWAY

windows 7 PRO x64
 
 
the same error, first install

Hi

i got the same error this afternoon.
This is the first install of win 7 x64 Pro SP1.

16 go RAM (2x8 Gb) GSKill
SSD 250 Go

I tried 2 different original DVD.

Can someone Help ?

Thank you
My System SpecsSystem Spec
20 Jan 2013   #19
redderz

Windows 7 Ultimate x64
 
 

Go buy yourself a single 2gb dimm, install windows, install updates and patches, shutdown, put your 16gb back in, bobs your uncle and it will work. Win7 for some reason gives this error when u have more than 4gb ram.
My System SpecsSystem Spec
20 Jan 2013   #20
gregrocker

 

Test your RAM - Test with Memtest86+ for 5-6 passes or overnight. If errors isolate the stick or slot using the steps in tutorial.

Remove all but one RAM stick to try install.

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS, enable Legacy BIOS, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. We are creating the partition here to mark it Active which overcomes certain install failures.
My System SpecsSystem Spec
Reply

 Win 7 0x80070570 install error




Thread Tools




Similar help and support threads
Thread Forum
Error code: 0x80070570 when attempting to install
I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop. I keep getting an error message to the effect thatWindows cannot install required files. ... Error code: 0x80070570Initially I thought that this was due to...
Installation & Setup
Install error 0x80070570 on Acer Nav50 after DBAN
Hey guys, self taught and "usually" self fix but this one has me stumped. Wife has an Acer Aspire One Nav50 netbook running an Intel Atom Processor 1660.0 MHz, with W7 starter. She has had it a few years & like the rest it had started to slow down. I have a genuine ISO of W7 Home Premium mounted on...
Installation & Setup
Cannot install Windows 7 on newly built PC (Error 0x80070570)
Hey guys I just built a PC and tried to install windows 7 ultimate. Specs: -i5-3570k -gigabyte ga-z68-ud3h b3 -8gb ram -sandisk extreme 120GB ssd -coolermaster 525W extreme PSU Seagate 500GB storage drive I first tried the DVD and got this error:
Installation & Setup
Fresh Install (due to new MOBO) Error 0x80070570
Hey Sevenforums, About a year ago I decided to build my first computer. I did so and there was much rejoicing. That is until it started BSODing everywhere when I played video games or watched Netflix. Coming to your forums I was encouraged to do a memtest, got new RAM, for a while the problem...
Installation & Setup
Win7 install error 0x80070570
Hi, I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails. Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when...
Installation & Setup
Install error 0x80070570
Hi everyone. First post here because Iím getting really frustrated with this error message. Error code: 0x80070570. Iíve tried searching around on the internet for a fix but Iím not coming up with a lot that pertains to my situation. I am clean installing a copy of Windows 7 professional x86 on...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:59.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App