Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Another installation problem

07 Aug 2009   #1
matata

Windows 7 Professional
 
 
Another installation problem

I downloaded RC1 and burnt a disc using an Iso Burner. At completion the following message appeared. "Setup Exe. Bad image. The application or DLL F:\Sources\SPWIZENG.DLL is not a valid Windows Image. Please check this against your installation diskette". Can anyone make sense of this for me please?
Gordon


My System SpecsSystem Spec
.
07 Aug 2009   #2
mickey megabyte

ultimate 64 sp1
 
 

hi matata and welcome to sevenforums,

it seems something went wrong with the either the burn or the download.

try burning again at a slower speed - if the problem happens again, you'll have to re-download, sorry...
My System SpecsSystem Spec
07 Aug 2009   #3
TGSoldier

 
 

^

Probably a bad iso..
My System SpecsSystem Spec
.

07 Aug 2009   #4
matata

Windows 7 Professional
 
 

Thanks for suggestions. I tried a second download after the first one failed and each time I've set the burn speed to the lowest setting or one above. I have tried a Cd and a RW DVD. Would the type of disc make adifference?
My System SpecsSystem Spec
07 Aug 2009   #5
mickey megabyte

ultimate 64 sp1
 
 

the iso will not fit onto a cd!

try a brand new blank dvd that your burner is happy with.

or, you can install from a usb 'thumb' drive - instructions here
My System SpecsSystem Spec
08 Aug 2009   #6
Capella

Windows 7 64 bit build 7600
 
 

most burner software have the "verify disk image" option after burning
enable this option on urs
if you are usign windows disk image burner, the option is rite there in ur face
My System SpecsSystem Spec
Reply

 Another installation problem




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 boot problem and installation problem.
When I try to boot into windows 7, it keeps running the boot fixing thing. After its finished it runs again. So I decided to re install windows 7. But I need more storage to install it. How can I boot into windows 7 when it cant get fixed by boot solver or it cant be re installed?
Installation & Setup
Problem during win 7 installation by USB. help!!!!
hello. i have dell studio 1458.320gb hdd. i always install win 7 on my laptop with bootable usb. but this time after formatting c drive when i pressed "next" to continue setup i got this message. "unable to create new system partition or locate existing system partition .please see setup log...
Installation & Setup
Help, Big installation problem, 11th time installation fail
Win7 64bit: While I am attempting to install a driver on cd rom, the disc suddenly crashed inside the rom and it also crashed the cd rom, then the OS remains the same so I tried shutting down the PC, but while shutting Down, BSOD suddenly flashed on my screen, I disregarded it, since I think it's...
Installation & Setup
installation and un installation problem in skype
i have dell inspiron laptop running windows 7 64 bit which came preconfigured with skype version 4.2.i updated skype to version 5.0 but this time while upgrading i gave path for program files as my E drive. now today when i tried to upgrade skype to 5.1 it always gives me "skype is already...
Software
HDD Installation Problem
Finally installed my new SSD. I plan to install W7 64 bit on it for dual boot with Vista X86. First attached physically on SATA 4 (0 and 1 is running my two Raid disks and 2 & 3 are my DVD players), next went into BIOS and activated disk 5. Booted and went into Disk Mangement and was asked if I...
Hardware & Devices
Installation Problem
I'm trying to install Windows 7 on an LS800, and I keep running into the same error message: "Windows was unable to update the boot configuration. Installation was cancelled." Since I was running a clean install, I set the BIOS to boot from the CD first, then the HDD. Computer specs:...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App