|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 Dec 2011 | #31 |
|
|
Quote: Originally Posted by theog
For maxtor HD Drives:
Jumper Settings | Seagate |
My System Specs |
| . |
|
|
| 10 Dec 2011 | #32 |
|
Is your DVD Drive set to cable select?
|
| My System Specs |
| 10 Dec 2011 | #33 |
|
|
im not sure i used the top part of the ide lead for dvd ,is that master?my hdd i use at min is connected using sata lead to mobo!dvd drive is connected using ide
that link u gave og has lots of info,thanks |
| My System Specs |
| . |
|
|
| 10 Dec 2011 | #34 |
|
|
Look at the jumper on the DVD.
|
| My System Specs |
| 10 Dec 2011 | #35 |
|
|
Quote: Originally Posted by theog
Look at the jumper on the DVD.
|
| My System Specs |
| 10 Dec 2011 | #36 |
|
|
Quote: Originally Posted by theog
Quote: Originally Posted by sinbin
shall i order a ide to sata converter!
then could i just plug the converter into the hdd and plug the sata lead from it in my sata 1 slot! would this work with what im trying to acheive? |
| My System Specs |
| 10 Dec 2011 | #37 |
|
|
When you built the rig, what jumper setting did you use.
|
| My System Specs |
| 10 Dec 2011 | #38 |
|
|
Quote: Originally Posted by theog
When you built the rig, what jumper setting did you use.
|
| My System Specs |
| 10 Dec 2011 | #39 |
|
|
Quote: Originally Posted by sinbin
master will make it main hdd,my sata drive is main drive i want to use,ata ide drive i wont for storage and videos
As stated repeatedly, the HD set first to boot in BIOS will determine that. The IDE jumper settings are only to differentiate the IDE HD from the OD in the BIOS. |
| My System Specs |
| 10 Dec 2011 | #40 |
|
|
ide.jpg
here lead i used thin one |
| My System Specs |
|
using sata hdd with ide at same time help!
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Similar help and support threads | ||||
| Thread | Forum | |||
|
D SATA Hard Drive disappears after random amount of time. My D 200gb SATA hard drive disappears around 1-90 mins while on windows 7. I have tried registry repairs and alot of things. Its not faulty cables because i used to have win Xp on exact same computer but reformatted to windows 7. Rebooting makes the hard drive reappear but it still disappears after... |
Hardware & Devices | |||
|
BIOS not recognizing both mSATA SSD and SATA HDD at the same time Hello all, I am new to the forum. Thank you in advance for your help. I have the M5-481PT-6644 which came installed with win 8. My HDD crashed and had to be replaced. While waiting on the RMA I upgraded my SSD to 128GB and installed win 7 (my win 8 copy went down the drain with the drive as... |
Hardware & Devices | |||
|
FYI Only - Discovered only slight diff betw SATA-1 vs. SATA-3 cables I read an article stating there’s very little difference between SATA cables. So I tried it for myself. This screenshot shows the slight differences in speed; likely most of you already knew this. In testing, an 11GB file transferred in 10 seconds using either cable. Vid link shows detail of... |
Hardware & Devices | |||
|
Sata Ext Drive corruption. IS IT TIME TO THROW IN THE TOWEL YET?! :cry:THIS IS SUCH A PAIN. after losing power to my computer in the middle of accessing the drive info,it still is recognized as a device but not detected anywhere else. i can bring up the drive on the hd low level disk tool but it reads as unknown an unallocated and when i tried to initialize it,i... |
Hardware & Devices | |||
|
SATA 3 not working on Asus P6X58D-E motherboard with SATA III support Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application... |
Hardware & Devices | |||
|
Safety of internal 3.5 Sata IDE in external Sata case for backups I'm looking at a Sabrent EC-UEIS7 Hard Drive Enclosure - 3.5" IDE/SATA to USB 2.0, eSATA in order to use one of my now internal Sata drives as an 'external' backup device. If I turn the external power off on the back of the external Sata enclosure with my extra old Sata connected in it...will... |
Hardware & Devices | |||
| Our Sites |
Site Links |
About Us |
Find Us |
|
Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd All times are GMT -5. The time now is 20:44. |
|
