Cannot install Windows 7 on newly built PC (Error 0x80070570)

Hey guys I just built a PC and tried to install windows 7 ultimate.
Specs:
-i5-3570k
-gigabyte ga-z68-ud3h b3
-8gb ram
-sandisk extreme 120GB ssd
-coolermaster 525W extreme PSU
Seagate 500GB storage drive

I first tried the DVD and got this error:

I assumed it was a corrupt DVD. I then downloaded the ISO from Microsoft and installed on a USB. I got the same Error. Re downloaded and reinstalled, same error. I looked online and found out it could be a ram error. Tried one stick, tried different slots, tried completely different brand of brand new ram, all to no avail. It always goes to 9% then gives the error. Any ideas?

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS: if UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with, or enable Legacy BIOS or Compatibility Support Module. Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt.You are creating the partition here for the purpose of marking it Active which overcomes certain install failures.