IDE drives problem


  1. matrixgaby
    Posts : 7
    Windows 7
       New #1

    IDE drives problem


    I just installed the new Windows 7. Until I deconnected my second HDD, a 120 GB IDE does not wanted to install. Now when is installed, I reconnected the second HDD. When turn on the windows, itīs not seen and my second DVD-RW, which is IDE also is not seen.
    Also none of those 2 is not seen is the BIOS.At startup it hangs 30-40 seconds, freezing, before displaying BIOS Post message notes.
    Before Windows 7 I had Vista and all was working fine.
    Please excuse my english, iīm not american.
    What can I do? Please, a hint to sove that.
      My Computer
    Quote Quote

  3. Anthony
    Posts : 1,870
    MS Windows 7 Professional 64-bit SP1
       New #2

    Check the jumpers on the back of the hard drive / DVD drive, make sure one is set to master and one set to slave.

    I hope this helps because i really don't know what you said forgive me!!
      My Computer
    Quote Quote

 

  Related Discussions
Problem with two SATA drives
in Hardware & Devices

Hoping someone might have some suggestions for this. So, after an upgrade I ended up with the following system: Asus P8P67 LE motherboard with Core I3 2120 and 4MB RAM. 3 Hard drives: 1. 40GB IDE drive with Linux Mint
Problem finding new drives
in Network & Sharing

Hi, I have just added a new drive external via usb2.0 to Buffalo Link Station LS-500GL. I have windows 7. I cannot find the new drive i have plugged in. Please help Alex
1st problem w/this build-no ROM Drives
in PC Custom Builds and Overclocking

I just got around to formatting the HDD and then iinstalled two programs, Streets & Trips 2010 and Roxio Creator Pro 2011. After that, the ASUS Sabertooth screen stays on for a long time, the welcome screen loads for a long time and I had no DVD-ROM Drives. I did restart and no ROM Drives, then I...
I am sorry to be raising this AGAIN as I know everyone has heard it 100 times before but I couldnt not find a solution that resolved this issue. When I boot up my Win 7 Pro x64 machine I get that balloon that states "Could not reconnect all network drives". How do I get rid of this? I am hard...
hello, sorry for my bad english :o english is not my native language... here's the problem: i have 2 usb flash disks (sandisk cruzer micro 4gb and sandisk cruzer blade 4gb) both of them, after asus motherboard drivers update (with driver genius 10) not working in windows 7 x64 ultimate. i...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 Đ Designer Media Ltd
All times are GMT -5. The time now is 06:38.
Find Us