Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 7 will not boot after install

02 Feb 2010   #41
flibble666

windows 7'ish x86
 
 

all sorted and running nicly x64 on my new i7


My System SpecsSystem Spec
.
26 Feb 2010   #42
smeegal

windows 7
 
 

Hi guys
I have had the same problem with this mobo with my sons computer.
I have found the problem is the HD audio and serial/parallel ports.
Disable this in the bios and you should be able to install.

I havent checked to see if there is a bios update and will do when i next get time

Ive now updated to the latest bios (702) and everything works fine with no issues.
My son was using win 7 home premium
I will check this out in the near future using pro or ultimate
My System SpecsSystem Spec
26 Feb 2010   #43
wallyinnc

Windows 7 x64 finally!
 
 

Thanks smeegal for sharing your experience and welcome to the forums!
My System SpecsSystem Spec
.

26 Feb 2010   #44
smeegal

windows 7
 
 

Quote   Quote: Originally Posted by wallyinnc View Post
Thanks smeegal for sharing your experience and welcome to the forums!

Thank you m8
Always glad to try and help when i can
My System SpecsSystem Spec
Reply

 7 will not boot after install




Thread Tools




Similar help and support threads
Thread Forum
New Windows install, freeze on install boot
I'm having trouble installing windows on a new rig I just built. I'm not sure if its a driver error or maybe some other hardware error I'm overlooking. Here's the problem I'm encountering. I've tried to install 3 different windows. Windows 7 64bit(burned), Windows 7 32bit (burned), Windows...
Installation & Setup
Boot config not working, tried clean install, can't install windows 7
My spouses pc all of a sudden wouldn't boot, not into safe mode or anything (vista), and so we were going to upgrade anyways to windows 7, so i bought the upgrade windows 7 and attempted to do a clean install and reformatted the c: drive which has 250gb, and each time i start the install it bogs...
Installation & Setup
Screwed up XP dual-boot install, now can't boot Vista
I was asked for a SP3 disc when I went to install the XP onto it's own partition. I didn't have it so I cancelled, now my Vista machine won't boot into Vista. It keeps auto-booting to the XP side and getting stuck at the same point with the SP3 disc. I tried hitting F11 for recovery at system...
Installation & Setup
cant boot to my xp after install 7
can anybody help me? i have 3 partition. there is xp on first, xp on second, and data on third. first is C. second is E, and third is D. then i deleted my xp on first partition. i deleted it cause i want to install win7. after the installation is complete, i never get boot menu, in my mind,...
Installation & Setup
XP and 7 Install Issues (Won't boot into Win 7 Install)
Hello Everyone, I have XP SP2 installed. I used EASEUS Partition Master to split my drive in half, one half being XP, the other half being a future install of Windows 7. Put DVD in, selected the blank partition, began the install. Once it gets to the first reboot, it will reboot and go...
Installation & Setup
USB boot install 14 Oct
I installed clean via USB flash this morning, Win 7 Ultimate. Expanding files was stuck at 0% for a few minutes. So, I unplugged a single USB device and install proceeded. All readers take note of this SF learned 'fix'. That is when I noticed that my DVD drive was spinning. I had...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:52.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App