Hard Drive Not Detected


  1. Posts : 60
    Win 7 SP1
       #1

    Hard Drive Not Detected


    Hello all,

    I've got an issue during post installation. One of my hard drive is never given a drive letter, but it does show up as a possible install drive during setup.

    I always have to go into Drive Management and assign that drive a letter (and moving my DVD drive down a letter to keep the letters in order).

    Under Drive Management the drive has the Properties (System, Active, Primary Partition), so I'm wondering if that is the issue.

    Is there a way to change Drive Properties (if that is the case)?

    Thanks



    T
      My Computer


  2. Posts : 1,557
    XP, Seven, 2008R2
       #2

    For some reason, maybe to prevent people from messing up their system, Windows sometimes hides the "system" partition. The system partition is the partition that holds the files necessary to boot (which is also why it is set "active"). If your system partition is only 100MB you might as well leave it alone. Do not assign it a drive letter.

    In my case Windows XP is on the system drive. but once I assigned it a letter in disk management, all is fine.

    Taliseian said:
    Is there a way to change Drive Properties (if that is the case)?
    Yes. By installing/moving the boot manager to another partition and setting that new partition as active. You could use the bcdboot and diskpart tools for that (both are included in Windows and on the recovery/install discs).
    Last edited by sup3rsprt; 26 Aug 2009 at 15:06.
      My Computer


  3. Posts : 6,305
    Windows 7 Ultimate x64
       #3

    What you may be detecting is the OEM restore partition. This will house the factory backup file if you use the OEM restore program (for example PC Angel). You will only be able to alter the partition using the advanced repair options when booting from the Windows 7 DVD.
      My Computer


  4. Posts : 60
    Win 7 SP1
    Thread Starter
       #4

    Orbital Shark said:
    What you may be detecting is the OEM restore partition. This will house the factory backup file if you use the OEM restore program (for example PC Angel). You will only be able to alter the partition using the advanced repair options when booting from the Windows 7 DVD.
    Doubtful since this is a homemade system with store bought drives.


    T
      My Computer


  5. Posts : 4,573
       #5

    sup3rsprt said:
    ...By installing/moving the boot manager to another partition and setting that new partition as active. You could use the bcdboot and diskpart tools for that (both are included in Windows and on the recovery/install discs).
    Did you attempt this or not? Do you understand it?
      My Computer


  6. Posts : 60
    Win 7 SP1
    Thread Starter
       #6

    I understood but have not attempted yet. College Mid-Terms are kinda in the way....


    T
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:36.
Find Us