Window 7 installation help needed

Page 2 of 5 FirstFirst 1234 ... LastLast

  1. Posts : 22
    Window XP 32 bit
    Thread Starter
       #11

    continuous beeps after completing installation of windows 7(checking video performance etc..). Installed fine but on final restart after installation stuck on black screen and on restart after black screen give continuous beeps.
      My Computer


  2. Posts : 12,177
    Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
       #12

    Can you post your system specs, we need to know what your computer is.

    Generally, continuous beeps mean memory or graphics card error.

    Did you install your graphics card and re-boot?
      My Computer


  3. Posts : 22
    Window XP 32 bit
    Thread Starter
       #13

    Window Xp 32 Bit
    Core 2 Duo 2.4 GHz,
    Intel DG41WV Motherboard,
    2GB DDR3 Ram,
    360 GB Hard Disk

    And I used Nvidia 256mb GeForce 7300/7200 graphic card on this motherboard but it got defective after some days and i removed it.

    Please reply the solution of this problem, after installation of window 7, stucks on black screen and on restart give continuous beep.
    Last edited by Gautamster; 13 Apr 2012 at 10:18.
      My Computer


  4. Posts : 22
    Window XP 32 bit
    Thread Starter
       #14

    Nobody replied, Nobody knows about my problem?

    Window XP 32 bit, Intel DG41 WV motherboard, CPU 2.4 GHz, Ram DDR3, 360 GB hard Disk, and I have used graphic card of nvidia 7300/7200 but it got defective after sometime and i removed it.

    After completing installation, window 7 stuck on black screen and on restart computer give continuous beep.
      My Computer


  5. Posts : 72,049
    64-bit Windows 11 Pro for Workstations
       #15

    Brink said:
    Guatamster,

    Are you able to just install Windows 7 to dual boot with XP using OPTION ONE in the tutorial below?

    Dual Boot Installation with Windows 7 and XP
    Gautamster said:
    I have not tried dual boot. But Let me tell you my problem again.
    I tried Device manager installation, it didn't worked for me. When I install window 7 it just install fine but after completing installation it checks video performance and all. And after the final restart it does not show any desktop. After all installation, stucks on black screen, I don't know why it is not working. I changed my cd rom once from ata to sata one and graphic card is removed.
    Guatamster,

    Please try the method above to see how that works for you instead, and let us know how it went. :)
      My Computer

  6.    #16

    Are you using the onboard graphics chip now with the failed video card removed? Look in BIOS setup to make sure your current display device is enabled correctly, and not outputted to any TV card or other output than VGA monitor.

    Test your RAM for 5-6 passes or overnight: RAM - Test with Memtest86+

    Unplug all other HD's and peripherals, boot the Win7 DVD to wipe the HD with Diskpart Clean Command using DISKPART At PC Startup.

    Clean Install Windows 7. If it hangs again then follow these steps to enter Device Manager during install to Uninstall any drivers showing in error - especially Display driver - to see if Install will complete so you can update driver from desktop: Device Manager - Access During Windows 7 Installation

    You referred repeatedly to Win7 installing via Device Manager. What do you mean?
      My Computer


  7. Posts : 72,049
    64-bit Windows 11 Pro for Workstations
       #17

    gregrocker said:

    You referred repeatedly to Win7 installing via Device Manager. What do you mean?
    Hello Greg,

    He meant via this. :)

    Device Manager - Access During Windows 7 Installation
      My Computer

  8.    #18

    What do you find when you enter Device Manager during install? Which devices are in error? Are you uninstalling them to allow install to complete? Please explain fully.

    Could be a setting in BIOS that was changed when OP installed then uninstalled video card. Those need to be gone over carefully. Sounds like it could be outputting wrongly, e.g. to a TV tuner or projector. Is the onboard graphics chip fully enabled and what are its settings?

    Is it possible you damaged the mobo during video card install/uninstall?

    Is the idea to install XP to see if it replicates the display issue?
      My Computer


  9. Posts : 22
    Window XP 32 bit
    Thread Starter
       #19

    I had a graphic card on my motherboard But after sometime graphic card got defective and after that i ran my pc without graphic card, after some days when i tried to install window 7, after completing installation window stucks on black screen and on restart pc gives continuous beeps. I tried device manager installation it shows yellow mark on many drivers. Video drivers and many more..I have tried to uninstall all, But i didn't wiped hard disk fully? my motherboard is new, its intel dg41wv.
      My Computer


  10. Posts : 22
    Window XP 32 bit
    Thread Starter
       #20

    I had a graphic card on my motherboard But after sometime graphic card got defective and after that i ran my pc without graphic card, after some days when i tried to install window 7, after completing installation window stucks on black screen and on restart pc gives continuous beeps. I tried device manager installation it shows yellow mark on many drivers. Video drivers and many more..I have tried to uninstall all, But i didn't wiped hard disk fully? my motherboard is new, its intel dg41wv. XP works fine everytime no errors.
      My Computer


 
Page 2 of 5 FirstFirst 1234 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:18.
Find Us