Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: oxc000000e Boot failed-required device is inaccessible (Windows 7)

01 Jun 2012   #31
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by moh3en View Post
i get this error in startup repair:

The instruction at 0xfba6584d referenced memory at 0x000000008, The memory could not be read.
you got this from startup repair in recovery environment. Seems like memory problems.

And why coudn't bcd not be written (could be disk error also). But it could write later!! so your system start now to win7 (with crash)
And why inaccessable boot device all of sudden
And why msahci.sys not found or corrupt.

it always crashes to msahci.sys error now?


My System SpecsSystem Spec
.
01 Jun 2012   #32
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

In recovery environment:

Code:
 
dir  e:\Windows\system32\drivers\msahci.sys
(does it exists?)
chkdsk/f  e:
chkdsk/f  c:
Any errors on C and E? All fixed? In case there were errors: run it again to see if errors are gone
My System SpecsSystem Spec
01 Jun 2012   #33
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Do this as well in recovery environment

Code:
 
sfc  /scannow  /offbootdir=c:\  /offwindir=e:\windows
or maybe it's
Code:
 
sfc  /scannow  /offbootdir=e:\  /offwindir=e:\windows
But I think the first command. It checks windows file integrity and hopefully repairs errors. Any errors? all repaired?
Run it again to see if all have been repaired
My System SpecsSystem Spec
.

01 Jun 2012   #34
gregrocker

 

Have you made your Lenovo Recovery disks and copied out your files with your boot disk? Copy & Paste - in Windows Recovery Console

If so I would run Lenovo Recovery from it's hotkey at boot, saving the disks as backup in case it fails.

One other thing to try first is to change the active flag to the Win7 partition itself and run Startup Repair - Run 3 Separate Times.
My System SpecsSystem Spec
01 Jun 2012   #35
moh3en

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by moh3en View Post
i get this error in startup repair:

The instruction at 0xfba6584d referenced memory at 0x000000008, The memory could not be read.
you got this from startup repair in recovery environment. Seems like memory problems.

And why coudn't bcd not be written (could be disk error also). But it could write later!! so your system start now to win7 (with crash)
And why inaccessable boot device all of sudden
And why msahci.sys not found or corrupt.

it always crashes to msahci.sys error now?
i get this error now! i don't have any error or crash before this problem! if it's for harddisk. send it for guaranteed?
My System SpecsSystem Spec
01 Jun 2012   #36
moh3en

Windows 7 Home Premium 64bit
 
 

Code:
dir  e:\Windows\system32\drivers\msahci.sys
Code:
It say "File Not Found"
chkdsk/f e:



Code:
sfc  /scannow  /offbootdir=c:\  /offwindir=e:\windows
result: Windows Resoure Protection could not perform the requested operation.

Code:
sfc  /scannow  /offbootdir=e:\  /offwindir=e:\windows
same result
My System SpecsSystem Spec
01 Jun 2012   #37
moh3en

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Have you made your Lenovo Recovery disks and copied out your files with your boot disk? Copy & Paste - in Windows Recovery Console

If so I would run Lenovo Recovery from it's hotkey at boot, saving the disks as backup in case it fails.

One other thing to try first is to change the active flag to the Win7 partition itself and run Startup Repair - Run 3 Separate Times.
Unfortunately i didn't make lenovo recovery disk. what's hotkey lenovo for recovery factory?
My System SpecsSystem Spec
01 Jun 2012   #38
gregrocker

 

My System SpecsSystem Spec
04 Jun 2012   #39
moh3en

Windows 7 Home Premium 64bit
 
 

please help me.
I thought I problem is for Partition Table. i used PTDD ( Partition Disk Doctor) bootable. when goto program tell me have a problem with Partition Table. and ask for fix it and i choose YES. but when goto windows Xp with hirron CD bootable. i can't see my hard disk and PTDD created 4 new drive with 3*30GB and 1*250GB.

But my harddisk partition was 450GB Drive C and 30GB Drive D and E (hidden drive for lenovo y460 laptop)

Where is my hard disk? how i can recover partition table such as before ?
My System SpecsSystem Spec
04 Jun 2012   #40
gregrocker

 

You're using a tool there that I've never heard of, and it sounds like it messed up your system pretty badly.

Download the tool we've used to help thousands of users successfully here, free Partition Wizard bootable CD. Burn to CD using Windows Image Burner, boot it and take a camera snap of your maximized Disk Management drive map with listings. We need to see this to proceed.

If you can recognize your 100mb System Reserved partition and/or Win7 partition, you can try the step 8 here to Rebuild the MBR with PW CD: Troubleshooting Windows 7 Failure to Boot

If this fails and you still have your Recovery partition, try marking it Active to run it at boot using the hotkey given on first boot screen or in your Manual on the Lenovo Downloads webpage for your model.

If you've lost your Win7 partition use the PW Partition Recovery Wizard to reinstate it: Partition Wizard Partition Recovery Wizard Video Help.

Try all of the steps in the Troubleshooting tutorial leading up to copying out your files to Clean reinstall with the Win7 installer provided, or use Factory Recovery disks you made or order from Lenovo Support.
My System SpecsSystem Spec
Reply

 oxc000000e Boot failed-required device is inaccessible (Windows 7)




Thread Tools




Similar help and support threads
Thread Forum
boot selection failed because a required device is inaccessible
Hi, I know a lot of people have posted this but I think mine is different to theirs. I took a SSD drive used to boot my sons pc, placed it in my computer and cloned it with Norton ghost onto a bigger drive. When I put the new drive in his PC I got the error "boot selection failed because a...
General Discussion
boot selection failed because a required device is inaccessible
Ok, so my recovery partition disappeared, so as a last resort I followed these instructions - and changed my active partition to the second partition in my list... and now my laptop is utterly bricked. I've tried downloading a windows 7 starter image and putting it on a USB and booting from that...
General Discussion
the boot selection failed because a required device is inaccessible
I have an Intel i5, Windows 7 Ultimate, and an SSD as my main drive and 2 SATA HDDs. One day, I got a BSOD appeared and my PC restarted restarted. After that, the following error appeared: Window failed to start. A recent hardware or software change might be the cause. To fix the...
General Discussion
oxc000000e Boot failed-required device is inaccessible
Hello, Installed Acronis True Image Home 2011 a couple days ago. I did not setup any items within Acronis yet for backups, etc. After install my system appeared O.K. and have shutdown/restarted several times without issue. Yesterday, the computer shut down inadvertently, then at boot i get this...
Installation & Setup
Boot selection failed because a required device is inaccessible
right, i've noticed another thread with the similar problem, here, and apparently it's fixed, but as i'm running my system on a laptop, i'm wondering what i can do to recover my system without any data loss. error message's more or less the same, "Windows failed to start. A recent hardware or...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:14.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App