Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: oxc000000e Boot failed-required device is inaccessible (Windows 7)

04 Jun 2012   #41
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

PTDD is not for nt6.

Try booting PW cd Greg suggested and use the partition recovery module.

After it has completed the scan it is important to tick ALL the partitions you want to recover.


My System SpecsSystem Spec
.
05 Jun 2012   #42
moh3en

Windows 7 Home Premium 64bit
 
 

thank you gregrocker for PW Bootable CD. i recovered my partition with this program. but Drive C have 420GB but 0 used and it's unallocated. please see this capture: also where drive is active?



also when i boot from hard disk show message " No operation system"
My System SpecsSystem Spec
05 Jun 2012   #43
gregrocker
Microsoft MVP

 

I'm afraid your C partition was not recovered. Did you run the Partition Recovery Wizard as shown in Partition Wizard Partition Recovery Wizard Video Help?

If it does not find the partition then it likely was ruined by the app you ran which has not support for Win7 and which I've never even heard mentioned here in three years.

Have you tried running Lenovo factory Recovery using the steps posted earlier? How to use the Lenovo pre-boot service partition to recover your software

If Partition Recovery Wizard cannot recover the C partition you ruined, and Lenovo Factory Recovery will not run from boot, then your options are to run Recovery Disks you pre-made, or order Recovery disks for your model from Lenovo.

Or you can get a superior Clean Reinstall - Factory OEM Windows 7 - everything you need is in the link.
My System SpecsSystem Spec
.

05 Jun 2012   #44
moh3en

Windows 7 Home Premium 64bit
 
 

i can recovered again partition with full scan . and now drive C is 40 gb used and it's NTFS and marked for active partition. but again show "no operation system".

also how i can order Recovery disks for your model from Lenovo ? i'm iran and lenovo haven't support for iran or don't send it for me!
My System SpecsSystem Spec
05 Jun 2012   #45
gregrocker
Microsoft MVP

 

Can you post back a camera snap of your maximized Partition Wizard drive map and listings? Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Forums

From booted PW CD mark the 200 mb System Reserved boot partition Active by rightclicking to Modify>Set to Active, click OK.

Then click on Disk 1 to highlight it, from Disk tab select Rebuild MBR, OK, APply both steps.

If this fails to start Win7 boot into Win7 DVD System Recovery Options or System Repair Disk to run Startup Repair - Run 3 Separate Times until Win7 starts on its own.

If these steps fail, change the Active flag to Win7 partition itself and repeat the steps above exactly.

If these steps fail then we have to consider the possibility your original problem was infection and attempt to disinfect and then run the repairs again. Steps here: Troubleshooting Windows 7 Failure to Boot
My System SpecsSystem Spec
05 Jun 2012   #46
moh3en

Windows 7 Home Premium 64bit
 
 

oxc000000e Boot failed-required device is inaccessible (Windows 7)-222.jpg
it's after quick scan again!! now drive C is 40gb used and NTFS and selected for Active. is that right?

Also can i give a backup of lenovo Drive (original factory include windows) ?


My System SpecsSystem Spec
05 Jun 2012   #47
gregrocker
Microsoft MVP

 

Did you complete the steps given in my last post to Rebuild MBR and then if necessary run three Startup Repairs?

What are you asking about Lenovo Recovery? It may or may not work once Win7 is booting again. Did you try running it yet from boot using the hotkey?

I would complete the steps first to try starting Win7, including disinfecting if it won't start to make sure the original problem wasn't infection.
My System SpecsSystem Spec
05 Jun 2012   #48
moh3en

Windows 7 Home Premium 64bit
 
 

i clicked for full scan. because before i got problem with loading windows 7 . i had about 150gb and now just show 40gb used in Drive C ( Get databack can find it . i tried with hirron cd and worked).

after full scan (now 80%) Rebuild MBR. but i have a question about how i can order Windows Recovery CD/DVD for my laptop? is that free? or can i pay for it and download it? because lenovo in USA and don't send to IRAN for me.

Also can i repartition my harddisk and make a new hard drive for lenovo y460 hidden for recovery and copy all data to new hard drive?
Also before when windows don't loading i tried for Fn+F11 and don't effect and don't work!

Also if a friend have lenovo y460 DVD Recovery. can i use it? ( this mean for windows genius serial number is same) or different for my laptop?
My System SpecsSystem Spec
05 Jun 2012   #49
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 
oxc000000e

still oxc000000e on boot?
My System SpecsSystem Spec
05 Jun 2012   #50
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Mark the LENOVO_PART (14GB) partition as active (with partition wizard) and boot from harddisk. Now it can install factory settings.

But do you really want that?
My System SpecsSystem Spec
Reply

 oxc000000e Boot failed-required device is inaccessible (Windows 7)




Thread Tools




Similar help and support threads
Thread Forum
boot selection failed because a required device is inaccessible
Hi, I know a lot of people have posted this but I think mine is different to theirs. I took a SSD drive used to boot my sons pc, placed it in my computer and cloned it with Norton ghost onto a bigger drive. When I put the new drive in his PC I got the error "boot selection failed because a...
General Discussion
boot selection failed because a required device is inaccessible
Ok, so my recovery partition disappeared, so as a last resort I followed these instructions - and changed my active partition to the second partition in my list... and now my laptop is utterly bricked. I've tried downloading a windows 7 starter image and putting it on a USB and booting from that...
General Discussion
the boot selection failed because a required device is inaccessible
I have an Intel i5, Windows 7 Ultimate, and an SSD as my main drive and 2 SATA HDDs. One day, I got a BSOD appeared and my PC restarted restarted. After that, the following error appeared: Window failed to start. A recent hardware or software change might be the cause. To fix the...
General Discussion
oxc000000e Boot failed-required device is inaccessible
Hello, Installed Acronis True Image Home 2011 a couple days ago. I did not setup any items within Acronis yet for backups, etc. After install my system appeared O.K. and have shutdown/restarted several times without issue. Yesterday, the computer shut down inadvertently, then at boot i get this...
Installation & Setup
Boot selection failed because a required device is inaccessible
right, i've noticed another thread with the similar problem, here, and apparently it's fixed, but as i'm running my system on a laptop, i'm wondering what i can do to recover my system without any data loss. error message's more or less the same, "Windows failed to start. A recent hardware or...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:52.
Twitter Facebook Google+