Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: oxc000000e Boot failed-required device is inaccessible (Windows 7)

06 Jun 2012   #81
moh3en

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
What applications are you afraid to loose? What do you mean by genius all the time?
Windows genuine and office and McAfee antivirus with Licence key that lenovo register it!
you think my partition in drive recovery is corrupt ? why told me none of them are working now anyway?

Also how i create 70gb. please tell me step by step. also if recovery partition doesn't work after reinstall windows. why i keep it?


My System SpecsSystem Spec
.
06 Jun 2012   #82
moh3en

Windows 7 Home Premium 64bit
 
 

Dear Kaktussoft . no answer? i'm wait for your replay
My System SpecsSystem Spec
06 Jun 2012   #83
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

windows license key you have. it's on COA stciker. MCafee is not that good. Use microsoft security essentials instead.

You should have made recovery dvd's and write down licence information before problems did occur. Don't cry now.
My System SpecsSystem Spec
.

06 Jun 2012   #84
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

I think your windows partition is a great mess now. Recovery partition doesn't work because you refreshed MBR, did getdataback... I don't know. It's not needed anayway
My System SpecsSystem Spec
06 Jun 2012   #85
gregrocker
Microsoft MVP

 

There is another way to Boot Recovery Partition using EasyBCD

But I have no confidence that you will complete the steps since I gave you specific repairs steps three times which you ignored and kept reporting back something else.

Do you ever plan to reply to me specific results of the specific steps I gave you, repeatedly?
My System SpecsSystem Spec
06 Jun 2012   #86
moh3en

Windows 7 Home Premium 64bit
 
 

Quote:
windows license key you have. it's on COA stciker
what's your mean? can't use Product key on below laptop for install another windows genuine?

Quote:
But I have no confidence that you will complete the steps since I gave you specific repairs steps three times which you ignored and kept reporting back something else.

Do you ever plan to reply to me specific results of the specific steps I gave you, repeatedly?
i did all thing you said me. what's you tell me and i don't it?

now .. what's solution? please step by step. 1- 2 - 3-

i can't write english like you. sorry
My System SpecsSystem Spec
06 Jun 2012   #87
moh3en

Windows 7 Home Premium 64bit
 
 

Dear gregrocker. if i'll find a friend that have DVD Recovery Disk. can i use it for recovery to factory setting?
what's about license key windows is same on both laptop?
My System SpecsSystem Spec
06 Jun 2012   #88
gregrocker
Microsoft MVP

 

Did you mark the Win7 System Reserved partition Active and then Rebuild MBR as shown in these video tutorials?
How to Set Active/Inactive partition -Partition Wizard Video Help.
Partition Wizard Rebuild MBR Video Help.

If Win7 fails to start did you then run Startup Repair - Run 3 Separate Times?

If these fail, change the Active flag to Win7 partition and try the above steps again.

If these fail you can follow these steps to Clean Reinstall - Factory OEM Windows 7 if you have a COA sticker with Product Key to use on the machine.


Is this clear? Please ask any specific questions if not.
My System SpecsSystem Spec
06 Jun 2012   #89
moh3en

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Did you mark the Win7 partition Active and then Rebuild MBR as shown in these video tutorials?
How to Set Active/Inactive partition -Partition Wizard Video Help.
Partition Wizard Rebuild MBR Video Help.

If Win7 fails to start did you then run Startup Repair - Run 3 Separate Times?

If these fail, change the Active flag to Win7 partition and try the above steps again.

If these fail you can follow these steps to Clean Reinstall - Factory OEM Windows 7 if you have a COA sticker with Product Key to use on the machine.


Is this clear? Please ask any specific questions if not.
Windows 7 partition Active is where? 200 MB System reserved partition or where windows 7 installed like Drive C.

Also Before i did rebuild MBR for Disk 1 and like video. do it again?
My System SpecsSystem Spec
06 Jun 2012   #90
gregrocker
Microsoft MVP

 

First set the Active flag on System Reserved, then Rebuild MBR. If it' doesn't start run the 3 separate Startup Repairs.

If those steps fail, move the Active flag to the Win7 partition to try both procedures again.

Do you have Product Key on COA sticker?


Attached Images
oxc000000e Boot failed-required device is inaccessible (Windows 7)-1270558000_86224332_1-pictures-buying-windows-7-prof-coa-sticker-only-100pcs-up-needed.jpg 
My System SpecsSystem Spec
Reply

 oxc000000e Boot failed-required device is inaccessible (Windows 7)




Thread Tools




Similar help and support threads
Thread Forum
boot selection failed because a required device is inaccessible
Hi, I know a lot of people have posted this but I think mine is different to theirs. I took a SSD drive used to boot my sons pc, placed it in my computer and cloned it with Norton ghost onto a bigger drive. When I put the new drive in his PC I got the error "boot selection failed because a...
General Discussion
boot selection failed because a required device is inaccessible
Ok, so my recovery partition disappeared, so as a last resort I followed these instructions - and changed my active partition to the second partition in my list... and now my laptop is utterly bricked. I've tried downloading a windows 7 starter image and putting it on a USB and booting from that...
General Discussion
the boot selection failed because a required device is inaccessible
I have an Intel i5, Windows 7 Ultimate, and an SSD as my main drive and 2 SATA HDDs. One day, I got a BSOD appeared and my PC restarted restarted. After that, the following error appeared: Window failed to start. A recent hardware or software change might be the cause. To fix the...
General Discussion
oxc000000e Boot failed-required device is inaccessible
Hello, Installed Acronis True Image Home 2011 a couple days ago. I did not setup any items within Acronis yet for backups, etc. After install my system appeared O.K. and have shutdown/restarted several times without issue. Yesterday, the computer shut down inadvertently, then at boot i get this...
Installation & Setup
Boot selection failed because a required device is inaccessible
right, i've noticed another thread with the similar problem, here, and apparently it's fixed, but as i'm running my system on a laptop, i'm wondering what i can do to recover my system without any data loss. error message's more or less the same, "Windows failed to start. A recent hardware or...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:40.
Twitter Facebook Google+