Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't get passed "Boot from CD"

07 Sep 2009   #31
Christopher

Windows 7 Ultimate 64-Bit / Ubuntu 10.04
 
 

You're right, I am heavily frustrated with myself for not thinking before I hit "Next" ...

I just wanted to know if anyone knew a way "around" my situation. I am going to put the old drive in, install Windows 7 on it. View the main drive and copy over the appropriate files I need to the second partition and then reinstall Windows 7 on the main drive.

I suppose the bright side is that it gives me a good reason to upgrade to 64-Bit.

Thanks for your help everyone, sorry for being frustrated!


My System SpecsSystem Spec
.
07 Sep 2009   #32
Tews

64-bit Windows 8.1 Pro
 
 

Believe me, been there, done that ... too many times!!
My System SpecsSystem Spec
11 Sep 2009   #33
ninjawoot

Windows 7 Ultimate v.7600 RTM 64Bit
 
 

Quote   Quote: Originally Posted by Christopher View Post
You're right, I am heavily frustrated with myself for not thinking before I hit "Next" ...

I just wanted to know if anyone knew a way "around" my situation. I am going to put the old drive in, install Windows 7 on it. View the main drive and copy over the appropriate files I need to the second partition and then reinstall Windows 7 on the main drive.

I suppose the bright side is that it gives me a good reason to upgrade to 64-Bit.

Thanks for your help everyone, sorry for being frustrated!
Have you switched places between Jumpers on your HDD maybie?

Ps. My English isnt so good.
My System SpecsSystem Spec
.

Reply

 Can't get passed "Boot from CD"




Thread Tools




Similar help and support threads
Thread Forum
Changing windows boot drive sata config from "raid" to "ahci"
So I have an AMD A88X motherboard in my htpc. For a few reasons I want to change the bios config for the sata controller from RAID to AHCI. I followed the instructions in this article: https://support.microsoft.com/en-us/...the-boot-drive to have windows load the ahci driver, but now I can't...
Drivers
How do i get passed "Some Settings are managed by System"
Hey im having a problem with my personal pc every time i try to update widows i run into this how can i fix this its messing with my graphics drivers and is makeing them crash when i try to play any video games
Windows Updates & Activation
"Windows Loading Files" infinite loop, Can't Boot USB "disk error"
hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping pc's on - booting - then "Windows Loading Files" - restart it's infinite :cry: i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time...
General Discussion
"Select Proper Boot Device" now "NTLDR is missing"
Computer Specs: CPU: I5-2400 MB: Asus Pz868 Ram: Corsair 8GB Vengeance LP Using on board VIdeo For now Maxtor HD Sata WD Raptor Sata HP Lightscribe DVD-r Drive Sata Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select...
BSOD Help and Support
Both "System reserved" and "C" partition cloned to external HDD: boot?
With EaseUS Backup Tool, I've cloned these two partitions ("System Reserved" and "C") to same-sized partitions on a external HDD ("X" and "Y"). Picture tells it concisely: How to make drives "X" and "Y" boot-able? In "Disk Management", I've noticed these partition labels missing: "X" (or...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:07.
Twitter Facebook Google+