Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 setup ACPI not compatible?

13 Sep 2009   #11
simonsiknasty

Windows 7 Ultimate 64bit
 
 

I think I know why it might have shown a wallpaper and mouse.
Usually when I have a disk that can be booted off, upon startup a black screen shows that says at the bottom "To boot from CD push any key..."

The way that I booted from the CD before, I had to go into the Boot Menu from the Motherboard screen on startup, as after multiple restarts, the black screen that I usually see was not there.


My System SpecsSystem Spec
.
13 Sep 2009   #12
simonsiknasty

Windows 7 Ultimate 64bit
 
 

Quote:
Like This ? with mouse cursor !
Sadly no. I was like this (with a mouse cursor)...
My System SpecsSystem Spec
13 Sep 2009   #13
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

In bios setup, is your boot order set to:

CD/DVD 1st

HD 2nd

etc, etc
My System SpecsSystem Spec
.

13 Sep 2009   #14
simonsiknasty

Windows 7 Ultimate 64bit
 
 

The BIOS screen is ordered:

Floppy
HDD
CD
With a yellow arrow pointed at HDD obviously showing that the HDD is the first boot selection.

I tried once again to install, same problem. But here's something that I found that looks like it could answer my questions. As to how to fix the problem, I am not quite sure.

Windows 7 RC x64 Installation DVD not loading
My System SpecsSystem Spec
13 Sep 2009   #15
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Quote   Quote: Originally Posted by simonsiknasty View Post
The BIOS screen is ordered:

Floppy
HDD
CD
With a yellow arrow pointed at HDD obviously showing that the HDD is the first boot selection.

I tried once again to install, same problem. But here's something that I found that looks like it could answer my questions. As to how to fix the problem, I am not quite sure.

Windows 7 RC x64 Installation DVD not loading

I would change yor boot order >>>>


CD/DVD
HDD
Floppy
My System SpecsSystem Spec
13 Sep 2009   #16
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Next I thought there might be a problem with your video card !
Were you connected to the internet to get updates during the install ?
My System SpecsSystem Spec
13 Sep 2009   #17
simonsiknasty

Windows 7 Ultimate 64bit
 
 

Quote:
I would change yor boot order
How?

Quote:
Were you connected to the internet to get updates during the install ?
Yes.
My System SpecsSystem Spec
13 Sep 2009   #18
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Do you know how to enter the bios setup of the computer by hitting the DEL key or one of the Function keys for your particular computer ? Then usually you can change the boot order there.
My System SpecsSystem Spec
13 Sep 2009   #19
simonsiknasty

Windows 7 Ultimate 64bit
 
 

Okay. But would that address the install issue in terms of actually getting somewhere instead of just a wallpaper and mouse?
My System SpecsSystem Spec
13 Sep 2009   #20
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Might, all this install stuff is just Trial & Error, In fact I am doing an install right now on another computer sitting next to this one !
My System SpecsSystem Spec
Reply

 Win7 setup ACPI not compatible?




Thread Tools




Similar help and support threads
Thread Forum
Win7 Starter getting error on initial setup; locked in setup loop
I have several Asus Eee netbooks that I'm getting set up to use at my school. I had some parent volunteers helping me get them ready to deploy, and one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup. Now when I...
Installation & Setup
get a new motherboard similar to the old one (compatible setup)
so if I want to replace my 6 year old gigabyte ex58-ds4 with a new motherboard, how can I get one that is similar, such as will fit the space available, use the i7 processor, same connections setup? If this is not enough info I can provide more...thanks! had a bios screen freeze problem a few...
Hardware & Devices
ACPI Driver for Win7 x32 isnt working at all
Hello fellow forum members, im having a problem with my asus eee pc 1201n with a running wind7 x32 bit. I had to reinstall it due some technical issues and the most things run pretty smoothly. The only problem Im having is, I can use my fn keys to change volume and stuff. So I searched for the...
Drivers
Is there ANY ram compatible with my setup?
Hey guys, I would greatly appreciate it if anyone could recommend some ram for me. I have a Gigabyte GA-880gma-ud2h qvl is http://download.gigabyte.eu/FileList/Memory/mb_memory_ga-880gma-ud2h.pdf I have an AMD Phenom II X4 965 Black Edition (DDR1333 Limitation) I currently have G.SKILL...
Hardware & Devices
BIOS not ACPI compatible BSOD on clean install of Windows 7?
I'm trying to install Windows 7 on a Compaq Presario 2100 laptop with 1GB of RAM and known good HDD. I ran memtest 86 for 12 hours with no errors. The BIOS sucks and has no options for ACPI, power management, or even serial/parallel port addressing, only boot order, system info, and password. ...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App