When clicking Install Now and you receive that error , click on cancel and go back to the welcome screen. Then put the USB stick in a different port and click install now again.
For me switching it to a 2.0 port worked.
Just curious: What Welcome screen are you referring to? Is an OS starting, or are you actually booting the installer?
My father's computer was taking a long time, 5 minutes to boot up from the windows flag and was also getting random blue screens during operation. I tried to install the latest ssd driver and now the computer is very slow to boot up and performs very slow when trying to open applications. In...
I'm running on a Crucial M4 256GB. Recently I have terrible boot timings, last was 2mins 4 seconds. I have trim enabled as well. I'm going to upgrade my firmware after writing this post so I'll see how that goes!
Attached is my read/write
Here's the link to my logfiles...
Hi all,
I recently replaced my standard 3.5" rotary HDD with a Crucial M4 Solid State Drive (SSD). Within a day or two of doing so, I started to have blue screen errors randomly. After checking the RAM was OK with MemTest86, I decided it was likely the HDD to be at fault and perhaps corrupting...
Every so often I find that the computer has rebooted on its own & numerous times while Reencoding Video I get Unexpected shutdowns. One of the errors shown is 0000000000041287, another is 0000000000000080 . It doesn't happen all the time but makes my computer unreliable. I tried to do a Memory test...
Quote