New
#11
Thanks for that information Greg. The Kingmax was the only drive installed at the time. It was immediately after the firmware update that it failed to boot. I ran start up repair well over 3 times to no avail. The boot was showing up on the C partition when checking it under disc management & the drive was active.
I did have this problem checked by a computer specialist where I buy most of my computer gear from & they informed me there was nothing that could be done & I could try a later version of the firmware when it became available, but so far that hasn't happened.
Thanks for your interest & concern. I will check for a later version of the firmware & install it when it becomes available & see whether it fixes the problem, but in the meantime all is running very well with the Samsung.