Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Install Windows "Windows could not complete the installation."

03 Jan 2014   #1
blewka

Windows 7
 
 
Install Windows "Windows could not complete the installation."

Every time I turn on my computer I have windows could not complete the installation. To install windows on this computer, restart the installation" It is a black screen and there is nothing there. I open processes by running new task on the task manager. I tried to find a solution and ended up using the System file checker in the command prompt. It said there were corrupted files that could not be fixed. I ended up having to go into a text file with the errors and I do not know what to do with them now I will paste them. These are the corrupted files that could not be repaired could someone explain to me how i fix this problem.

2014-01-03 22:58:08, Info CSI 000000e2 [SR] Beginning Verify and Repair transaction
2014-01-03 22:58:08, Info CSI 000000e4 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-03 22:58:10, Info CSI 000000e6 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-03 22:58:10, Info CSI 000000e7 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2014-01-03 22:58:10, Info CSI 000000ea [SR] Could not reproject corrupted file [ml:520{260},l:62{31}]"\??\C:\Windows\IME\IMESC5\DICTS"\[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted
2014-01-03 22:58:10, Info CSI 000000ec [SR] Verify complete

2014-01-03 23:03:55, Info CSI 00000306 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-03 23:03:55, Info CSI 00000308 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch


My System SpecsSystem Spec
.
04 Jan 2014   #2
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

What installation ?

Are you trying to install windows ?

Clean Reinstall - Factory OEM Windows 7

Clean Install Windows 7
My System SpecsSystem Spec
05 Jan 2014   #3
gregrocker

 

If this is an OS issue with installers, try working thruogh the Troubleshooting steps in my signature picture below.

If this is failed Win7 install you should be working from booted installation media, not the OS. Here are steps to overcome most Win7 installation failures:

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install:

Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. I would use a fresh ISO written with tool in Step 2 as yours is in question.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the HD and marking Active which overcomes certain install failures.
My System SpecsSystem Spec
.

Reply

 Install Windows "Windows could not complete the installation."




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 install locking up on "completing installation"
I am trying to do a clean re-install on my PC. I followed this sites tutorials on cleaning and partitioning the drive before installing, but I can't get past the first reboot. Yesterday I only did a "clean" in diskpart, partitioned files, and let the computer mull on it overnight. 15 hours later,...
Installation & Setup
"Windows could not complete installation" - yet again.
Hey everybody, I've been trawling this site for a little while and I know this topic comes up a lot. But, my situation is a tiny bit different, so I figured I'd quit lurking and ask directly. I recently bought a Fujitsu T904, factory refurbish, off of Ebay. I get her in the mail, she's gorgeous,...
Installation & Setup
Stuck at "Completing installation" install windows 7 on new SSD.
I bought a new SSD today.It is a kingston v+200 60gb.so I want to install windows 7 on my new ssd.I already have 2 HDD installed.One had the old windows 7.so I install the SSD and do a complete rewiring of my pc because its to messy.Then hooked up everything except the 2 old HDD. So i go to the...
Installation & Setup
Windows 7 Installation "Can not install on this disk"
Hello, I was gonna install windows 7 pro 64bit on my laptop (clean install). However, when i got to the point where i go to partition the different discs I got this message: "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the...
Installation & Setup
"Cannot complete installation. Please restart installation."
Hello! Well, I built a new computer for myself, every piece of it brand new. So I slapped a brand new harddrive into my old chassis and I'm setting that one up for my parents. I tried to install a 32-bit version of WIndows 7 via Upgrade disk on a clean drive. Worked doing the 64-bit version...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App