Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Problem after format

27 Jan 2014   #1
alexander606

Windows 7 Ultimate x64
 
 
Problem after format

Hello,

I just installed windows 7 on my PC and before the installation it stucked and I forced to reboot it. After the reboot, my PC is starting but nothing appears on screen and after 1-2 minutes, it makes reboot again and again and again. I can't make format or use safe mode or anything at all since I see nothing on my screen.
Please help me, its emergency!

Thanks


My System SpecsSystem Spec
.
27 Jan 2014   #2
Brink

64-bit Windows 10 Pro
 
 

Hello Alexander,

See if you may be able to boot to your boot menu (F# key) to select to boot from your installation media to format and start over.
My System SpecsSystem Spec
27 Jan 2014   #3
gregrocker

 

Back up your files, unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install:

Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. I would use a fresh ISO written with tool in Step 2 as yours is in question.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the HD and marking Active which overcomes certain install failures.
My System SpecsSystem Spec
.

Reply

 Problem after format




Thread Tools




Similar help and support threads
Thread Forum
DRIVERS problem after format !!!!
hello guys ... recently I had windows 8 on my laptop. so I wanted to format my laptop and install windows 7 on it. what i did is that i backed up drivers using some software, then did the format. when i tried to run the laptop i needed to restore the drivers back in order to function the...
Drivers
Problem with .wtv file format
Hi folks. I am considering using WMC as my PVR software for a planned upgrade to my home theater setup. I've been testing it out. The immediate problem I am having is with the .wtv file format for recorded TV. I know if I had a HTPC connected directly to my TV via HDMI there would be no issue...
Media Center
wireless problem after format
Recently,i just got my laptop acer aspire 4738 formatted.Yesterday,someone nice from here helped me regarding my hard drive capacity.Everything worked fine last night until i installed few programs,cc cleaner,firefox and a new account user for my father. i installed the programs and i pasted his...
Network & Sharing
Problem after format
Hello! So, I have Windows 7 installed on 2 HDs, One which is 1TB and one which is 500GB, so the Windows 7 on the 1 TB HD sorta "broke" (thats another story and is irrelevant I belive) and became unusable, so I got the 500 GB HD and installed Windows 7 on it and started using at as my main one,...
Installation & Setup
Windows 7 installation CD format problem UDF format
Hey guys, I downloaded Windows RC ISO file, there's a readme file that reads "This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification." What exactly does UDF mean here? Plus, that ISO has a size of over 2GB, but when...
Installation & Setup
Format Problem :(
Hi , My operation system is now Windows 7 x32 but ı want to have 2 os in my computer.While i was trying to install Microsoft XP setup screen did not come . Just writing Click one button to continue installing. I tried 4 different CD ' s but it was the same problem that looking throught the black...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App