How to convert from dual boot to single boot 2 HDDs - Win 7 & Vista64


  1. Posts : 5
    Windows 7 Premium 64bit
       #1

    How to convert from dual boot to single boot 2 HDDs - Win 7 & Vista64


    Hello,

    I'm trying to convert back to using just Win 7 after having a successful dual boot setup for a few years now. However, the multiple runs of the Win 7 startup repair have not moved the system files to my Win 7 HDD. Here is the data from the BCDEDIT command:

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    C:\Windows\system32>bcdedit
    Windows Boot Manager
    --------------------
    identifier {bootmgr}
    device partition=D:
    path \bootmgr
    description Windows Boot Manager
    locale en-US
    inherit {globalsettings}
    default {current}
    resumeobject {470dc358-369b-11e2-8f7f-fc31c5b7de69}
    displayorder {current}
    {8ee6a7a6-4e60-11dd-8165-ce8fc0eea296}
    {470dc35c-369b-11e2-8f7f-fc31c5b7de69}
    toolsdisplayorder {memdiag}
    timeout 30
    Windows Boot Loader
    -------------------
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.exe
    description Windows 7
    locale en-US
    inherit {bootloadersettings}
    recoverysequence {470dc35a-369b-11e2-8f7f-fc31c5b7de69}
    recoveryenabled Yes
    osdevice partition=C:
    systemroot \Windows
    resumeobject {470dc358-369b-11e2-8f7f-fc31c5b7de69}
    nx OptIn
    Windows Boot Loader
    -------------------
    identifier {8ee6a7a6-4e60-11dd-8165-ce8fc0eea296}
    device partition=D:
    path \Windows\system32\winload.exe
    description Microsoft Windows Vista
    locale en-US
    inherit {bootloadersettings}
    osdevice partition=D:
    systemroot \Windows
    resumeobject {8ee6a7a7-4e60-11dd-8165-ce8fc0eea296}
    nx OptIn
    Windows Boot Loader
    -------------------
    identifier {470dc35c-369b-11e2-8f7f-fc31c5b7de69}
    device partition=E:
    path \Windows\system32\winload.exe
    description Windows Vista (TM) Home Premium (recovered)
    locale en-US
    osdevice partition=E:
    systemroot \Windows
    C:\Windows\system32>



    I also would like to remove the bootup menu so the system boots straight into Win 7 instead of waiting on a selection. I suspect this will be remedied once I get the system files moved to the Win 7 drive, but wanted to note that request as well.

    Thanks in advance for your help!
      My Computer

  2.    #2

    Post back a screenshot of Disk Management - Post a Screen Capture Image

    If Primary partitions you should be able to move the Bootmgr - Move to C:\ with EasyBCD - Windows 7 Forums. Make sure to mark C:Win7 Active.

    If the OS you want to delete is on the left then you can use Partition Wizard to Resize Partition - Video Help.

    Or equalize space between all partitions and unallocated space whether adjacent or not using How to extend partition easily with Partition Wizard - video help.
      My Computer


  3. Posts : 5
    Windows 7 Premium 64bit
    Thread Starter
       #3

    Here is the screenie of my disk management:

    How to convert from dual boot to single boot 2 HDDs - Win 7 & Vista64-capture.png

    Thanks.
      My Computer


  4. Posts : 13,576
    Windows 10 Pro x64
       #4

    In order to write the system files to C:, Windows 7 has to be marked active.

    Partition - Mark as Active

    Disconnect drive 0 and 1, mark disk 2 active, then run startup repair.
      My Computer


  5. Posts : 5
    Windows 7 Premium 64bit
    Thread Starter
       #5

    To be certain, I should mark the Win 7 HDD as 'active' using Disk Management prior to powering down the PC and then disconnect the other 2 HDDs? Once they are physically disconnected, I boot up using the Win 7 DVD to run the start repair option (3 times) to load the system files to the Win 7 HDD.

    Once complete, I should no longer have the boot option to choose between Win 7 or Vista so it should boot straight into Win 7? If this happens, can I just delete all the Vista related files off that HDD? I don't want to format it because I have countless pictures, videos and my .pst Outlook file that I want to use on another PC (transferring the former Vista HDD to another PC for storage).

    Thanks!
      My Computer


  6. Posts : 13,576
    Windows 10 Pro x64
       #6

    There`s also no reason E: should be marked active.
      My Computer

  7.    #7

    Yes, proceed as you said. But I would also swap the Disk0 cable to Win7 drive so it is in DISK0 position for less problems. Make sure Disk0 remains set first HD to boot in BIOS setup when the others are plugged back in.

    The correct way to delete an OS is always to delete its partition in Disk Mgmt. You should already have a backup of your files since a HD can fail at any time If not I would back them up to another drive and then delete the old Vista partition. If this is not possible, then shrink the Vista drive in Disk Mgmt since there is plenty of space, create a New Partition in the shrink space labeled Data, drag your files there in Explorer using Select All on the Organize tab. Once confirmed they are all there then delete the old Vista partition in Disk Mgmt and create another storage partition there.
    Partition or Volume - Shrink
    Partition or Volume - Create New
    Partition or Volume - Delete
      My Computer


  8. Posts : 5
    Windows 7 Premium 64bit
    Thread Starter
       #8

    Strange, but Windows cannot access my Drive E: now for some odd reason. I'll reboot and see if it can find it. Disk management still sees it though.

    Thanks for the tips, I'll work through them all....pity you can't just delete the Vista files and move on, but I can see the benefit of reformatting the drive then copying the files back over.
      My Computer


  9. Posts : 5
    Windows 7 Premium 64bit
    Thread Starter
       #9

    AddRAM said:
    There`s also no reason E: should be marked active.
    I think startup repair did this as I used to have Vista 64 on that drive but deleted program files when it was not 'active'. Any way to make it NOT active?
      My Computer

  10.    #10

    Delete E in Disk Mgmt after backing up its files and marking Inactive. Partition - Mark as Inactive - Windows 7 Forums
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:28.
Find Us