Windows 7 Repair Install screen black before install finished

Sorry but a quick bump. I've edited to make it clearer - was writing the original at 5am cross-eyed after hours at the screen.

This behavior most often happens when the video card is outputted to a television or projector. You can enter Device Manager from boot to try to disable the erring device to see if it will allow Win7 to start normally to a VGA or HDMI monitor: Device Manager - Access During Windows 7 Installation

Check also in BIOS setup for monitor output settings.

Otherwise compare the install you have to the perfect install compiled in Clean Reinstall - Factory OEM Windows 7 as if it is the grossly inferior factory install or done much differently then you might want to invest now in a perfect install. Be sure to read the Special Note to Dell Owners at the end to preserve bootable diagnostics if they still function.

You'll avoid problems by installing only the display driver provided by Win7 installer or Updates, unless it only provides Standard VGA in which case I'd import the latest from the Dell Support Downloads webpage for your model and never the ATI or Nvidia bloatware package of it's driver. This is because OEM's often modify this driver which is vetted by MS before loading into Windows Update, and the bloatware package provides nothing but problems.

Some absolutely fantastic links, thank you very much indeed, although relevant only if I finally give up on trying to save my existing install, which I'm slowly resigning myself to. I tried running the device manager from the repair install but it wouldn't load and anyway would be working on the repair OS not the laptop OS I guess. I changed every BIOS setting, nothing worked and nothing relevant anyway. I never had the chance to install any custom drivers - this was with whatever driver Windows gives out of the box, so I am very happy to know about that Device Manager command if I do a fresh Windows install, assuming I can get far enough in the sequence of steps before the screen dies.

I do have a disk image of the Windows install shortly before I started the repair install. It includes all the problems I was trying to fix, but I could get any files - drivers etc - from it. Is there a way I can manually install a driver with only access to the file system? I could copy the files onto the Win7 boot USB drive, boot into repair, call the DOS command, and do whatever I like to the files - this is why it seems there must be a way!

Huge thanks once again for your very illuminating post, it'll come in very handy if/when I resign myself to a fresh install.

(The previous one was a Dell OEM one, I had lots of problems from day one, not sure whether it was hardware or OS, never had an OS need a repair install so quickly.)

Another handy utility thanks. Do you know if this tool can extract from and install into a Windows install that cannot boot up? Or does it have to be run from within that booted Windows environment? That is exactly what I want to do, but the Windows install the driver is in (an image of the install previously), and the Windows install I want to install it into (the half-completed repair install), don't boot. Do you know if it can still help on a broken Windows file system?

Please read again the steps for how drivers are handled in Win7 from Clean Reinstall - Factory OEM Windows 7 as they are not like XP at all. These steps are printed in red so they can't be missed. Win7 will provide the drivers for almost all devices during install and via Windows Update. Any still missing after all Updates are installed are normally easily found on the PC's Support Downloads webpage.

Thanks for the advice gregrocker, but note that this is precisely the problem. Windows 7 repair install has automatically installed a driver for the monitor which turns the monitor off, preventing me from entering the Windows license key, which prevents me booting into Windows and accessing any driver functionality. The screen turned off half way through the repair install process. What I want to do is put the HDD into a SATA caddy, force-feed the half finished repair install with some drivers by accessing the file system manually, then resume the repair install at the point I enter a license key. I did get the repair install to download updates, although it only seemed to download a megabyte or so.

What makes you think that Windows Update provided such a driver that would do that? I've never heard of such a thing and doubt it its the case unless you have found known cases of such behavior.

Plug in an external monitor to the VGA port on most laptops to see if the problem persists.

A Repair Install should not ask for a license key until afterwards when its time to activate.

I have two theories. I'm not saying it was Windows Update, but the driver is something bundled with Windows, as at no point have I had any opportunity to intervene in the process. I initially thought it was corruption on the disk, but I've replaced the three driver files for the default monitor. My alternative theory (just from thinking about your question thanks) is that the repair install corrupted its registry when it was merging in the registry from my previous Windows install - it seems Win7 repair installs Windows then copies in everything from the old Windows (as opposed to XP where it seemed to just copy new Windows OS files over old Windows OS files).

I've tried HDMI - do you think VGA is more likely to work? I went to buy a VGA cable and the shop said VGA was no more likely to work than HDMI.

The repair install I believe has completed and just needs activating.

I have found nothing online from anyone with a similar problem for any monitor, let alone my specific one.