Windows 7 product ID fail

Page 1 of 3 123 LastLast

  1. Posts : 15
    Windows 7 Professional 32-bit
       #1

    Windows 7 product ID fail


    This is my first post. If I am posting incorrectly kindly
    provide correct steps and accept my apologies.

    I have two desk top pc's both hand-me-downs.
    I have back up on both.

    pc A:

    dual core Vista upgraded to windows 7 several years ago

    pc B:

    quad core HP with windows 7
    I do not see any sticker with product ID on this one


    I have purchased one Window 7 Professional service pack 1 64-bit
    and one Windows 7 professional Upgrade Key.

    I attempted to follow tutorial to switch the HDD's and contacted
    Microsoft via phone without success.

    Product ID validation fails and I have one day left.

    Any help is most appreciated.
      My Computer

  2.    #2

    What "tutorial to switch the HD's" did you follow and what exactly are you trying to do?

    If you already had Windows 7 on these PC's, why did you buy new copies? You can Clean Reinstall Windows 7
    64-bit using the same key used to activate 32-bit as these are interchangeable.

    If you're only wanting to upgrade Home Premium to Professional without reinstalling then you can insert the key into Windows Anytime Upgrade - How to - Windows 7 Forums

    You can always Clean Reinstall Windows 7 using the same Product Key, even if you move it to different hardware if it is a retail copy. If it is Factory or Builder's OEM then it can be reinstalled as often as you want on the same PC.

    Based on this information, now please tell us exactly what it is you are trying to do because it is not at all clear and leaving me to guess.
      My Computer


  3. Posts : 15
    Windows 7 Professional 32-bit
    Thread Starter
       #3

    I have lost my link to the tutorial, but it was on this site & I think you were the author gregrocker.
    Sorry to be unclear.
    After I backed up both PC's
    I removed the HDD's and put the drives from A into B and B into A.
    I have:
    booted from repair disk
    reflect emergency disk
    installed windows 7
    but when I activate I get message that the product ID is not valid
    I bought new copies because the microsoft tech told me I needed to purchase as the OEM versions on each PC
    were not valid once the drives were exchanged.
    Thank you & I hope this is more clear.
      My Computer

  4.    #4

    If you have OEM versions on each PC, then did you reactivate the moved image with that PC's Product Key on the System page Activation link?

    Try that first, as you should never need to buy a new license when you already own one for that PC, just reactivate with the key that had been used on that same PC. You can then use Anytime Upgrade to go to Professional.

    If you moved Professional to a PC that only had a license tied to it for Home Premium, then you can do this Change between Win7 versions workaround to change it back to Home Premium, Activate with the license tied to that PC, then insert the Pro key as an Anytime Upgrade.
      My Computer


  5. Posts : 15
    Windows 7 Professional 32-bit
    Thread Starter
       #5

    The OEM version on PC A was for Vista & had been upgraded to Windows 7 & the activation window will not accept the Vista OEM product key.
      My Computer

  6.    #6

    If you installed Win7 then you should not expect it to accept a Vista key. How was the Win7 install to that PC originally activated? Use that Product Key to activate it.


    Are you wanting to change the hard drives for the same version of Win7 between two PC's and used the tutorial to Adjust Win7 to boot on new hardware with Paragon Adaptive Restore CD? Did you attempt to reactivate each with the Product Key that was originally used for that OS and not that PC, if these are retail keys? If one is an OEM key then it needs to have the key changed to the one which is tied to the existing mobo.
      My Computer


  7. Posts : 15
    Windows 7 Professional 32-bit
    Thread Starter
       #7

    I did not expect the windows 7 install to accept a Vista key, but it will not accept the windows 7 key that was active and functioning prior to the disk exchange.

    Both PC's are windows 7 professional
    on pc A Vista OEM was original OS & was upgraded to windows 7 professional (32-bit)
    (a Gateway)
    on pc B windows 7 OEM was original OS I brought windows 7 professional (64-bit) because Microsoft Tec indicated I had to purchase & that the OEM software was not valid once I moved the HDD.
    (a HP there is no sticker on the HP case)

    I want to use the HP (quad core) for better response. I do a lot of family history with pictures etc. & use many software packages which seem to "bog down" with the Gateway (dual core).

    I am sorry you are having to guess what I am trying to do.
    My goal is to simply use the drive from Gateway PC in HP PC.

    I hope this is more clear.
      My Computer

  8.    #8

    It is not possible that HP would ship preinstalled WIn7 on a PC without affixing a COA sticker, so check again. It is illegal for them to do so. Is it possible you acquired the OS some other way?

    If not where did you get the Product Key you were using to activate the HP install? What happened when you tried to reinsert it before MS told you to buy another key?

    If you have slow performance then we can help you troubleshoot that. The HP Factory install is the worst possible install of Win7 one can have, larded with bloatware including a dozen factory utilties that duplicate and interfere with better versions built into Win7. Having these freeloaders all start on the back of Win7 cripples it so badly it isn't even Win7, so you may have never even experienced Win7 on that PC.

    You can greatly regain the OS's native performance working gradually through the steps in Clean Up Factory Bloatware, but most tech enthusiasts prefer to do a Clean Reinstall Windows 7.

    The installer is provided in Step 1. Over a million users have done this without a single complaint, nor has anyone returned with problems who stuck with the tools and methods recommended, which are based on tens of thousands of installs we've directly helped with here since beta.
      My Computer


  9. Posts : 15
    Windows 7 Professional 32-bit
    Thread Starter
       #9

    I will try the Clean Reinstall Windows 7 & let you know how it goes.

    Am I correct that this method saves my installed programs to windows.old?
      My Computer

  10.    #10

    I would not depend upon Windows.old as a backup method. You should have any files you don't want to lose backed up externally or to free Cloud storage as in Sync, Backup and Store your Files to the Cloud with OneDrive.

    Plus if you are going to do a Clean Reinstall Windows 7 I would delete all partitions except where the conditions apply in Special Note to HP Owners at the end of tutorial. If you have the OEM partitions then it definitely is/was a factory install and must have the COA sticker. Some of those partitions may be worth keeping. You might also get by with doing the Minimal Factory Recovery which is discussed as close to a Clean Reinstall without the bloatware.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:45.
Find Us