Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: USB Boot after Clean All

26 Feb 2015   #1
Mefra

Windows 7 Ultimate x64
 
 
USB Boot after Clean All

Hey everyone,

I cleaned my HD with diskpart while at the Windows7 installation while booting from USB. However, I didn't get to finish the installation at that moment, so I turned off the pc to install Windows at a later moment. Surprisingly though, it won't boot from USB anymore. There is nothing wrong with the USB cause it works on my other pc (tried after the clean all).

The boot sequence in the BIOS is kinda strange though. I used to have 5 or 6 options (3 of them were USB devices), but suddenly there are only 3 options: cdrom, floppy and hdd. What I did next was swap the hdd for USB Generic (some other option at the BIOS), but then it still wouldn't boot from USB. Also tried manually selecting on startup with the F8 button, but that didn't help either.

Any suggestions?


My System SpecsSystem Spec
.
26 Feb 2015   #2
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Re burn your iso file to the usb stick using Wintobootic, it works perfectly.

WiNToBootic bootable usb drive windows vista/7/8 - Bootable USB | Bootable USB
My System SpecsSystem Spec
Reply

 USB Boot after Clean All




Thread Tools




Similar help and support threads
Thread Forum
Tried to clean Regedit now Win 7 will not boot
I'm running a Dell 8700 pc - win 7 64 bit My DAW (Cakewalk Sonar Producer 8) program would not install because it would not accept the reg key. I tried doing a "clean install" by going into regedit and deleting all the folder associated with my DAW program. After doing this, my PC will not...
General Discussion
W7-64 clean install will not boot without Windows DVD ?
Hi, I previously had XP32 running from the first partition of an SSD. I cleaned off the second partition, shrunk it down to 90GB, TRIM, and performed a clean install of W7-64 onto it. I allowed it to install only essential security updates during installation. Now at boot it...
Installation & Setup
Why don't we boot clean?
This would sure make things run faster, so why not clear startup items & hide all Microsoft services, ecxept for the one I read we need which is Windows Installer service?
General Discussion
BSOD after clean boot. Please help!
OK...I've been trying to figure out my laptops problems for the past month and half now. My laptop is an Asus G73JW-A1. I am running Windows 7 64-bit. After receiving it, I was getting BSODs and random freezes. After 2 fresh installs of Windows 7, the BSODs stopped but the random freezes...
BSOD Help and Support
clean install (boot loop)
ok this is the second time i've installed win7 ultimate to my pc, its the x64 version ok the reason i had to reinstall it was due to after removing linux i corrupted my mbr and didn't have anything important so i just reformated my drive and reinstalled windows my issue is after the...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:30.
Twitter Facebook Google+