Windows 7 install on >2TB partition


  1. arghh
    Posts : 1
    Windows 7 Pro 64bit
       New #1

    Windows 7 install on >2TB partition


    Intel S1200V3RPL Board
    1x 3TB SATA

    I am unable to install Windows 7 (or even Server 2012) on the entire 3TB partition. In setup, the whole partition is selected however it automatically splits into two partitions with no option but to select one of the two partitions to install on.

    I've looked in the BIOS for EFI related settings and tried to boot my windows usb drive each time, no go. I then created an entirely new GPT bootable drive using Rufus, following this guide: UEFI Bootable USB Flash Drive - Create in Windows and the result when using this newly created GPT bootable drive is a few extra beeps during the post process.

    The only BIOS options I could see that had anything related to EFI were:
    EFI Optimized Boot (tried both enabled and disabled)
    Boot Option Retry (tried both enabled and disabled)

      My Computer
    Quote Quote

  3. Ztruker
    Posts : 6,285
    Windows 10 Pro X64
       New #2

    Why not make a much smaller boot partition, like 1GB or so and setup the rest of the drive as a data/storage partition?

    ... or try this: How to install Windows on 3TB or 4TB and larger HDD
      My Computer
    Quote Quote

  4. AddRAM
    Posts : 13,576
    Windows 10 Pro x64
       New #3

    1 GB

    Seriously, Windows can not see the entire 3 TB drive, create a 150 to 250 install partition for windows, I would go with at least 250 since you have soo much space. Partitions have to be no more then 2 TB (1862 GB) for windows to see and use it. Make 1 more partition out of the rest.

    A possible scenario for now.

    1 at 250 GB for windows
    1 at 1272 GB
    1 at 1271 GB

    You can always re arrange the non windows partitions again later with Partition Wizard, but for now, just get the job done :)
      My Computer
    Quote Quote

  6. Solarstarshines
    Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       New #4

    AddRAM said:
    1 GB

    Seriously, Windows can not see the entire 3 TB drive, create a 150 to 250 install partition for windows, I would go with at least 250 since you have soo much space. Partitions have to be no more then 2 TB (1862 GB) for windows to see and use it. Make 1 more partition out of the rest.

    A possible scenario for now.

    1 at 250 GB for windows
    1 at 1272 GB
    1 at 1271 GB

    You can always re arrange the non windows partitions again later with Partition Wizard, but for now, just get the job done :)

    This makes lots more sense than the other but i figured when he meant 1GB probably was 100.00 GB which is a decent size for a OS but i would just invest in a SSD then break down that 3TB for back up
      My Computer
    Quote Quote

  7. gregrocker
    Posts : 50,642
       New #5

    Are you booting the flash stick as a UEFI device in Boot menu?

    If not what are the settings in BIOS setup for CSM, Legacy BIOS, Secure Boot, UEFI or EFI?
      My Computer
    Quote Quote

 

  Related Discussions
Trying to do a clean install and my Windows 7 Home Premium x64 seems to have an aversion to putting the system reserved partion on disk 0. My HP notebook has two identical disk drives. If I boot up the windows install with both drives unallocated and do a custom install, the window where i select...
Hi folks We're trying to create a dual boot environment on a Lenovo laptop with XP intstalled already. To do this we have cloned the original 80GB disk using Macrium Reflect to a 500GB drive. This was successful - the cloned drive booted with no problems. We then made the unused area of the...
Hey SevenForums, So I would like to install Windows XP onto another partition that I created, but I cant seem to install it. When I boot to the CD, it says windows was shutdown to protect your computer after its loaded everything and is preparing the setup. But when I boot to Windows 7 everything...
So here is my issue: I have a OEM CD from my manufacturer. I have two separate partitions in which I am going to be installing Windows on, one that is going to be connected to my Domain at my work, and then the other section of Windows that would be for my own personal use. Using the OEM disc...
Windows 7 won't install on partition
in Installation & Setup

I'm trying to install a fresh copy of 7 RC onto a separate partition on my hard drive. Everything will go fine until I select the partition. This is the message that pops up above the next button: "System was unable to create or locate an existing system partition. See setup file log for more...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 13:07.
Find Us