Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BootManage UNDI , PXE-2.0 (build 084) help !

12 Apr 2015   #1

BootManage UNDI , PXE-2.0 (build 084) help !

My pc is Fujitsu Computers Siemens.
Can anyone help me with this Error ?

BootManage UNDI , PXE-2.0 (build 084)
BootManage PXE-2.0 PROM 1.1 , I82547 3.50 , SDK 3.0/084 (OEM73)
Copyright (C) 1989,2003 bootix Technology GmbH, D-41466 Neuss.
PXE Software Copyright (C) 1997, 1998, 1999, 2000 Intel Corporation.
Licensed to FSC GmbH

Please Help me

My System SpecsSystem Spec
12 Apr 2015   #2
Anshad Edavana

Windows 7 Ultimate x64


That error message means your system is trying to boot from LAN ( called PXE boot - used in enterprise environment) and since the system is not configured to boot from a PXE server, it's showing the error message instead.

You may ask why your system is trying to boot from LAN instead of hard drive. Here is why ;

Usually this is the boot device priority of a typical computer.

Hard drive -->DVD ROM --> Removable media --> LAN

BIOS will try to boot from the first boot device and if it is not present or not bootable, it will try the next device. So the PXE boot error message means either one of the following scenario.

1. HDD has no OS/not-partitioned so BIOS is trying to boot from an alternate boot device which is LAN in your case.

2. System is not detecting a hard drive so it's trying to boot from the next device - LAN.

I would try the below steps.

1. Enter BIOS setup and check whether it detected the hard drive. If yes, configure it as the first boot device and retry.

2. If no hard drive is detected, carefully unplug the HDD from it's bay and reconnect. Then retry again.

Let us know your findings.
My System SpecsSystem Spec

 BootManage UNDI , PXE-2.0 (build 084) help !

Thread Tools

Similar help and support threads
Thread Forum
Messed up with MBR now it gives me Broadcom UNDI PXE 2.1 v11 . 4.1
I have an acer laptop my problem started when i wanted to extend my c partition because it had no space at all but it wouldnt let me do it so i ended up converting my disk to dynamic disk and i wanted to convert it back to basic and i order to convert it i installed (windows 8) and deleted all...
General Discussion
Intel UNDI, PXE-2.1 (build 082)
Hello, (like the forum and im new here)! I currently have a Toshiba Satellite L355D-S7815 running Windows 7 Ultimate 32-bit Anytime i start my laptop i get a black screen following up with a message; Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation For Realtek...
PC Custom Builds and Overclocking
Can I install Icon Packs designed for Build 7600 on to Build 7601?
Can I install Icon Packs designed for Build 7600 to Build 7601? An Icon Pack was saying install on to 7600 only and after I checked my regedit, I learned that I have 7601 (Probably SP1, I don't know). Would I have any problems if I install the icon pack? Thanks.
Upgrade from Build 7100 to Build 7264?
Hi All, I am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta? I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand...
Installation & Setup
Windows 7 Build 7012 Screenshots Emerged & Build 7013 Details
Windows 7 Build 7012 Screenshots Emerged & Build 7013 Details We all are waiting for Windows 7 Beta 1 build 7000 to get release but it seems some one out their already have access to Windows 7 Build 7012. Here is...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:09.
Twitter Facebook Google+