Clevo Probook w651sf | Cant install win7 in uefi mode

Hello , i cant install win 7 in uefi mode , getting this error >

Some1 can help me ?

If this is a WIndows 8 PC you must disable Secure Boot in BIOS setup, then boot the Win7 DVD as a UEFI DVD drive. Delete all partitions during the install.

A flash stick installer must be formatted for UEFI using only Option One of UEFI Bootable USB Flash Drive - Create in Windows

Downgrade Windows 8 to Windows 7
UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums

gregrocker said:

If this is a WIndows 8 PC you must disable Secure Boot in BIOS setup, then boot the Win7 DVD as a UEFI DVD drive. Delete all partitions during the install.

A flash stick installer must be formatted for UEFI using only Option One of UEFI Bootable USB Flash Drive - Create in Windows

Downgrade Windows 8 to Windows 7
UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums

Secure boot is disabled already and i made usb stick by rufus with gpt mode for uefi. I think i didn't miss anything but idk why i got this error

Then we need to take a look at your BIOS settings choices for CSM, UEFI, Legacy BIOS and BIOS Boot order. Also are there Reset to Defaults for Other OS or Windows 7? Pictures can help.

Did you boot the installer as a UEFI flash stick device?

Do the stick over using Option One and make sure the settings don't jump any when you add the iSO. Compare it to the picture exactly before completing.

gregrocker said:

Then we need to take a look at your BIOS settings choices for CSM, UEFI, Legacy BIOS and BIOS Boot order. Also are there Reset to Defaults for Other OS or Windows 7? Pictures can help.

Did you boot the installer as a UEFI flash stick device?

Do the stick over using Option One and make sure the settings don't jump any when you add the iSO. Compare it to the picture exactly before completing.

all bios options are here >












yes i booted

im sure i did all whats writing on guide.

gregrocker said:

The error indicates the flash stick installer failed to boot and attempted to boot the hard drive and Windows instead.

This means the stick is not booting correctly. Try writing it again per my instructions above about Option One.

If this fails try a DVD burned with Windows 7 USB-DVD Download Tool or another flash stick.

i tried make flash stick by rufus , cmd and some different ways but there is same problem.

i put in bootx64.efi file to correct folder also but idk what im missing.

im sure im doing correct every step.

Hi,

Did you already try with a DVD ?
This will be my next step... I'll let you know !

teodp said:

Hi,

Did you already try with a DVD ?
This will be my next step... I'll let you know !

Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool does not work with UEFI.

it wont work i think.

Reading the guide here UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with

I thought it was possible because they mention both DVD and USB.

....unless using 'retail' DVD differs from a DVD burned from the ISO ..!