Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7-8-and Win7 install failure.

16 Oct 2015   #1
Steinar

Win 7 64-bit
 
 
Win 7-8-and Win7 install failure.

I have a Gigabyte F2A75-D3H board with CD/DVD and a new Samsung SSB HD256Gb.

Last week after using install of Win 7 from Microsoft somethng went wrong on an update from the server. I got a lot of failure messages trying to start my computer. Such as:
Kernel_securety_check....
PTN_LIST_CORRUPT
Bad_Poolheader....
IRQ_NO_LESS------

I took the HD to another computer and I had no space left!! I was still 100Gb.!

The computer started and reloaded all the time and I had only one time the screen on but could not use my windows to see al
nything og it.
So I thought to re-install the W7!! But there was no backup files to find. There was nothing to use in Win7 at all. I tried my winzip software to see and fix. No way as everytime the pc stopped and again reloaded.

I reformatted the HD and started to use my Win 8 CD for re-installing all....

I wil not work!!! The input is going up to 3% and one time 23% before it stops and tell me Win 7, 8 can\t be saved on my only HD I have attaced to the computer.

What is worong or what am I doing wrong?

I have all available CD registered and nothing else then the Motherboard - CD/DVD and SSB HD attached.

After many days I don\t see where to go to get my PC updated with Win 10 again.

Sincerely
Steinar
NORWAY


My System SpecsSystem Spec
.
16 Oct 2015   #2
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi and welcome to SevenForums,
Looks like some things have gotten a little easier ?
Looks as though you can activate 10 with a activation key from win-8.1 or 7
Next big Windows 10 release will ease activation hassles

For clean install of either,
Clean Install Windows 7
Clean the ssd first using command prompt
My System SpecsSystem Spec
16 Oct 2015   #3
Steinar

Win 7 64-bit
 
 

Quote   Quote: Originally Posted by ThrashZone View Post
Hi and welcome to SevenForums,
Looks like some things have gotten a little easier ?
Looks as though you can activate 10 with a activation key from win-8.1 or 7
Next big Windows 10 release will ease activation hassles

For clean install of either,
Clean Install Windows 7
Clean the ssd first using command prompt
I have tried this several tims!!

I wont re-insall on my NEW SSB HD with a registered version of Win 7 nor 8.1

All the time I am getting can't install to this partison. Even following the Win instruction to delete and format does not handle it.
I have no other thing attached to my Pc. Just a NEW SSB Hd, CD/DVD and the install CD.

A solution is mention on the web.
Download the file from windows and run! How can I run a file when I don't have Windows running?? I have nothing to run this file. Or is it an option I can use via the Win 8 installation CD?

Steinar
NORWAY
My System SpecsSystem Spec
.

16 Oct 2015   #4
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi,
Interesting you entered command prompt during the install of either 7-8 disk ?
Command Prompt at Startup

After entering command prompt I believe with Shift+F10
Clean and or clean all
Disk - Clean and Clean All with Diskpart Command
If this is a new ssd just make sure you format it and mark the disk as active,
Partition - Mark as Active
My System SpecsSystem Spec
Reply

 Win 7-8-and Win7 install failure.




Thread Tools




Similar help and support threads
Thread Forum
How to Install Win7 64bit on Win7 32bit using Custom install,No Format
I want to install windows 7 ultimate 64bit on a other parition as dual dual boot or reinstall. I have a very important file about 237gb in my 2 tb hard disk. I dont have a another pc or hard disk. I have backed up my files in the created partion in my pc. I want to go from win 7 32 bit to work with...
Installation & Setup
Win7 install - fast copy/backup during install (harddisk failure)
Hi My laptop has two particitions, C and D. C seems to have quite some bad sectors. Ran chkdsk yesterday for whole day and it marked out some bad sectors. Now when I do fresh install to drive C, installation cannot complete. Once copying from DVD is over, I can pass the "starting windows"...
Installation & Setup
Fresh Win7 Install "Failure Configuring Windows Updates"
Doing a fresh oem win7 sp1 pro x64 install. After initial setup allowed Windows update to do It's thing (146 updates). Upon reboot I get the message "failure configuring windows updates" Have read extensively re. this issue but, unfortunately, have not found a definitive resolution. ...
Windows Updates & Activation
Win7 RC Boot Failure
I installed Win7 RC, everything was OK for a few days. This morning I turned it on and it can't boot up properly. WerFault.exe, runonce.exe, explorer.exe, and misexec.exe all fail to load. 0x77243892 error, says the memory could not be read. Only thing that shows up is a black screen with the...
General Discussion
Help Please: Trying to install Win7 Pro (disk boot failure)
Hello, I could use some help. I'm now thinking I bought the wrong Win7 Pro disk (System Builders). I built a new PC and thought this would be the right version for a brand new install but now I have my doubts. I am trying to boot from DVD drive (Win7 install disk). My bios screen (Gigabyte...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:34.
Twitter Facebook Google+