Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD at boot says "...not fully ACPI compliant"

25 Oct 2016   #1

32 bit Windows 7 Professional
BSOD at boot says "...not fully ACPI compliant"

I installed windows 7 and theirs no problem with it, but later I decided to downgrade my W7 to Wxp. When I install win xp when installation was in "Windows starting to set up" but later on something came up which says "ACPI Bios is not fully ACPI compliant"...

My System SpecsSystem Spec
25 Oct 2016   #2

Windows 7 HP 64

Win XP is an old (and good) OS but it isn't compatible with new hardware.
You should try to install Win XP under Win 7 on a virtual machine. Microsoft has a virtual machine software. Google and look to see if it can install Win XP on the virtual machine.
My System SpecsSystem Spec

 BSOD at boot says "...not fully ACPI compliant"

Thread Tools

Similar help and support threads
Thread Forum
Win 8.1 to 7 downgrade bios not fully acpi compliant
I am trying to downgrade a dell inspiron 3531 from 8.1 to 7 by using a memory stick but when booting from from the usb stick it loads files and just comes up with bios not fully acpi compliant error. Have been told to install with a dvd but havn't tried this yet. Read a few threads about this error...
Hardware & Devices
alienware 17 R2 BIOS not fully ACPI Compliant after A08 installed
Updating your Alienware to Bios level A08 from A06 will result in your Windows 7 system booting to a BSOD. Nothing you can do will repair this except reloading A06 again. If your Alienware has M2 SSD with Windows 10 loaded, you can use this system to downgrade to A06. Then Windows 7 is happy again....
BSOD Help and Support
BSOD at boot says "...not fully ACPI compliant" but worked before
From power cycle or push-button reboot, I now fall into Windows Error Recovery screen, with options to - Launch Startup Repair (recommended) - Start Windows Normally The first one goes to BSOD declaring "The BIOS in this system is not fully ACPI compliant. Please contact your system vendor...
BSOD Help and Support
Reinstall driver "Microsoft ACPI Compliant Control Method Battery"
Hello all, I've spent a good few days trying everything the internet has thrown up to fix my mistake but nothing has worked. I shall list my attempts to fix subsequently. My problem is this: six days ago, I was using my laptop on its battery and I noticed that the battery icon in the...
bios not fully acpi compliant stop error
Before I get into the details of the issue I want to point out that this computer was running Windows 7 fine without any bsod or other errors for about 6 months. 6 months ago I performed a wipe/ restore of my system drive to clean out the crud that windows/programs build up over time. windows 7 had...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:17.
Twitter Facebook Google+