Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Fresh install win7 home prem 64 bit can not get disk to run !

11 Sep 2017   #31
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

You`ll have to tell us step by step what you are doing and what happens when you get to the problem.

Installing W7 on that board should be no harder than enabling Legacy boot in the Bios, that`s all you should have to do.

Get back to us when you can :)


My System SpecsSystem Spec
.
11 Sep 2017   #32
LearningNinja

Windows 7 home premium 64 bit
 
 

Quote   Quote: Originally Posted by AddRAM View Post
You`ll have to tell us step by step what you are doing and what happens when you get to the problem.

Installing W7 on that board should be no harder than enabling Legacy boot in the Bios, that`s all you should have to do.

Get back to us when you can :)
Ohhhhhhh ! I wish it was that easy ! Ok so do you want all the BIOS screen shots and how they are set ? Or just detailed INFO on what the major settings are ( you know which ones are important ) and then what happens when I try the installation and describe any error messages or problems ? Yes can do and I will only try one solution at a time so that it will be easier for you monitor the steps as I go along , unless you see a multitude of problems lol So should I just enable legacy boot and thats it ? or load the default settings in the BIOS first as I am unsure what changes have been made etc ? other than SATA has been set as AHCI and UEFI set over Legacy pretty much as the BIOS screen shots show that I down loaded in previous posts .
My System SpecsSystem Spec
11 Sep 2017   #33
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Yes, set the Bios to defaults,(F5) but make sure you set it to Legacy Boot, and disable Secure boot if that Bios has that feature, then hit F10 to save and exit.

Put your install media in, dvd or usb stick, make sure it boots from that.

Only have the drive you want to install windows on plugged in.

Tell us your results.

This should not be so difficult.
My System SpecsSystem Spec
.

11 Sep 2017   #34
LearningNinja

Windows 7 home premium 64 bit
 
 

Quote   Quote: Originally Posted by AddRAM View Post
Yes, set the Bios to defaults,(F5) but make sure you set it to Legacy Boot, and disable Secure boot if that Bios has that feature, then hit F10 to save and exit.

Put your install media in, dvd or usb stick, make sure it boots from that.

Only have the drive you want to install windows on plugged in.

Tell us your results.

This should not be so difficult.
Ok sounds like a good plan and indeed not difficult at all to set it that way
My System SpecsSystem Spec
11 Sep 2017   #35
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi,
F7 is actually Optimize defaults not F5
F10 is save and exit.
My System SpecsSystem Spec
11 Sep 2017   #36
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Most boards it`s F5, but you understand :)

Thanks Mike :)
My System SpecsSystem Spec
14 Sep 2017   #37
LearningNinja

Windows 7 home premium 64 bit
 
 

Quote   Quote: Originally Posted by AddRAM View Post
Most boards it`s F5, but you understand :)

Thanks Mike :)
I have started the install ! everything seems to be going ok . I will let you know when it is finished .
My System SpecsSystem Spec
14 Sep 2017   #38
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Good to hear. It should take no more than 15 minutes.
My System SpecsSystem Spec
14 Sep 2017   #39
LearningNinja

Windows 7 home premium 64 bit
 
 

I just got this message ....Installation was canceled any changes that were made to your computer during the installation process will not be saved .......install windows ..setup cannot continue due to a corrupted installation file . Contact the vendor of the windows installation disc or your system administrator for assistance ......I have another win 7 installation disc that I will swap for this one and try again .
My System SpecsSystem Spec
14 Sep 2017   #40
LearningNinja

Windows 7 home premium 64 bit
 
 

Quote   Quote: Originally Posted by LearningNinja View Post
I just got this message ....Installation was canceled any changes that were made to your computer during the installation process will not be saved .......install windows ..setup cannot continue due to a corrupted installation file . Contact the vendor of the windows installation disc or your system administrator for assistance ......I have another win 7 installation disc that I will swap for this one and try again .
windows could not install required files,the files might be corrupt or missing make sure all files required for installation are available and restart installation error code 0x80070570
No device drivers were found make sure that the installation media contains the correct drivers .
windows Installation encounted an unexpected error verify that the installation sources are accessible and restart the installation error code 0x0000005
My System SpecsSystem Spec
Reply

 Fresh install win7 home prem 64 bit can not get disk to run !




Thread Tools




Similar help and support threads
Thread Forum
Install sys image Win7 home prem 64bit in Dell Inspiron 5748
I have a Dell Inspiron 5721 running Win7 home premium 64bit SP1 - 3rd Gen i7-3537U proc I'm trying to save a System Image and transfer it to a Dell Inspiron 5748 that is running Win 8.1 - 4th Gen i7-4510U proc. The 5748 had Win7 HP64bit SP1 loaded on it, but I lost it due to an...
Installation & Setup
BSOD - Fresh Install of Win7 Home Prem 64bit - While playing cod4
Fresh install of Windows 7 Home Premium x64, I have 5 other hard drives, the only thing I did was reinstalled win7 on my SSD (my main drive) due to I have receiving to many BSODS before for things I didn't understand so I figured might as well reinstall all seemed well until I was: playing cod4,...
BSOD Help and Support
Genuine OEM Win Home Prem x64 fresh reinstall 0Xc004F063 error
Hello guys, A month back i purchased an SSD for my old HP envy laptop(purchased in 2010). I removed the old harddrive and chuked in the ssd in its place and reinstalled the windows home prem x64 edition using the the key extracted from my windows installation on my old harddrive. Everything...
Windows Updates & Activation
win7 home prem desktop/win7 pro home network issues
--edit, see my second post... This is supposed to be easy? OK, first I have a desktop, win 7 pro 64. I never thought I'd own a laptop, need networks so I might have disabled something at some point. (I've disabled everything I don't need for performance reasons - game/graphics rig) It...
Network & Sharing
New build, fresh install of Win7 home prem. Issues
Ok, so I built a new PC lastnight and proceeded to install what I thought to be Windows 7 Home Premium 64bit. After the installation was done, I checked system properties and it's showing as a 32bit OS. Here are my system specs: AMD Phenom II x6 1055T Thuban 2.8Ghz Processor 4Gb of G.Skill...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:31.
Twitter Facebook Google+