Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How To Fix A Botched Windows 7 Install

31 Jul 2018   #1
MaskedRiderC

Windows 7 Professional SP 1
 
 
How To Fix A Botched Windows 7 Install






Hello, all! Let me be clear; I totally botched up my installation of Windows 7, and it's on me. I went to install it on a brand new blank SSD (a SanDisk SSD Plus), and while I was installing it and installing numerous updates, I by accident stopped the C++ part, mistaking it for something else I had going on at the time. Um, whoops!

When I finished with the updates and rebooted, I got into a startup repair infinite loop--as in machine would initially boot, then state "Windows is loading files," then system repair, then a message stating "Windows cannot be repaired." I tried reinstalling, but the same thing happened. I used the info on this link (Startup Repair Infinite Loop Recovery) to try and fix it to no avail, as the registry hive had 0 bytes on it as per step 13 of this process. So, how to completely reformat the new SSD so that i can attempt to do another clean install and get round this madness? Thanks in advance, y'all!


My System SpecsSystem Spec
.
01 Aug 2018   #2
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, Kali, VMWare Workstation Player, OpenVPN
 
 

Hi MaskedRiderC,

Welcome to SevenForums!

Can you access boot menu? I believe it is the F12 key. Press power button on computer, immediately start pressing either F12 and you should get to the boot menu. Place Win7 DVD in drive. Choose CD/DVD

After revisiting thread, I see you tried reinstalling Win7 and still have loop issue, you need to repair/rebuild the Master Boot Record (MBR) which is located on the first sector of the drive. You should not have to reinstall windows. Reinstalling windows will not correct MBR issues.

How to fix MBR on SSD with AOMEI Partition Assistant

Since you cannot get past loop issue you'll have to install AOMEI Partition Assistant on USB or CD or DVD and boot to it then repair MBR on your SSD.

Backupper and Partition Assistant on same bootable USB

How to create AOMEI Partition Assistant WinPE bootable CD

@mrjimphelps, your thought will work, however, much easier to rebuild MBR.

Nic
My System SpecsSystem Spec
01 Aug 2018   #3
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
 
 

I have a similar problem, although not exactly the same -- I somehow messed up a hard drive by erasing some low-level information. A reinstall appears to be successful, and the drive works if it's not the boot drive; but it won't work as a boot drive.

I'm planning on doing a backup of a working install with Clonezilla, so that it is a sector-by-sector, blind backup, rather than the standard image backup; I then plan to do a sector-by-sector, blind restore to the problematic drive.

My thought is that a sector-by-sector blind backup and restore will get ALL of the information off of the good drive and write it to the bad drive. In other words, it will back up the low-level boot information that a normal backup won't get.

If I remember to do so, I'll post back here with the results after I try this.
My System SpecsSystem Spec
.

Reply

 How To Fix A Botched Windows 7 Install




Thread Tools




Similar help and support threads
Thread Forum
windows 7 boot error following botched windows 8 installation
Ok, so after I downloaded the wndows 8 finish consumer preview and loaded the iso onto the drive, I went to boot it off of the flash drive. I ran into the common problem of the installer telling me I had a missing restartDVD driver. so, I go to restart my computer, and I got the following error:...
BSOD Help and Support
PLease help witha botched Linux install
Hi I have a new Dell Laptop with Windows 7 installed . I wanted to try the Suse and somehow the CD had some problems so the installation aborted. After that I am in a mess.Now I cannot install anything. 1) I have tried installing Win XP .But the dreadeded BSOD -7B error came 2) Tried the Win &...
Installation & Setup
botched ATI update, cant boot from that install have questions.
I have 2 installations of windows on my main computer (signature rig). I booted my second installation and while updating the ATI driver the computer BSOD'd me. I have been unable to boot that installation in safe mode, startup repair did not work citing ''bad driver'' booting in vga mode did not...
BSOD Help and Support
I aligned my partitions and botched Windows Recovery!
Long story short: I aligned the partitions on my SSD using GParted Live. I tried to boot into Windows and got this error: "Windows failed to start. Blah, blah, blah check your devices. Error: 0xc0000225 Info: The boot selection failed because a required device is inaccessible."It told me to...
Performance & Maintenance
Botched downgrade to WMP11.
As the title says, I tried downgrading to WMP 11 and everything went tits up, I guess I've got a mix of WMP 11 and WMP 12 files as well as a registry entry that I was told to edit. I've ran the SFC file checker thing and I'm still getting nothing. It's not a disaster as I am running Itunes but...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:48.
Twitter Facebook Google+