Update your Win 7 installation media

Page 3 of 129 FirstFirst 1234513103 ... LastLast

  1. Posts : 138
    Windows 7 Ultimate x86
       #21

    Thanks for the kind reply, Paul.


    1. Rufus seems to lack the feature workking with folders. Trying to do away with ISO conversion.


    2. SIW2 has created a little utility disc 17514x64-v6.iso. Can this be used as a substitute for windows iso when using Rufus to create a bootable USB thumb drive?


    3. Or, would diskpart do the job? What are the commands needed?


    4. How does one get around the 32GB limit of USB thumb drive?


    Looking to upgrade from an old 775 x86 system, so apologies for these incoherent sounding questions.


    Many thanks and best regards,
      My Computer


  2. Posts : 6,162
    Win 7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
       #22

    Hi goopy,

    goopy said:
    1. Rufus seems to lack the feature working with folders. Trying to do away with ISO conversion.
    I don't understand what you are saying here!

    goopy said:
    2. SIW2 has created a little utility disc 17514x64-v6.iso. Can this be used as a substitute for windows iso when using Rufus to create a bootable USB thumb drive?
    I think this thread [post #2 and post #7 in particular] will help you: How to make a bootable UEFI system repair USB

    goopy said:
    4. How does one get around the 32GB limit of USB thumb drive?
    I don't understand what you are saying here!

    I hope this helps!
      My Computer


  3. Posts : 15,181
    Vista x64 / 7 X64
    Thread Starter
       #23

    2. SIW2 has created a little utility disc

    17514x86.iso

    17514x64-v9.iso.

    Can this be used as a substitute for windows iso when using Rufus to create a bootable USB thumb drive?
    Yes, you could use Rufus to create bootable usb with that iso.

    Then copy the contents of the installation media you have updated onto the usb ( you can leave my boot.wim in the sources folder. If you are copying the stuff over, explorer will ask if you want to overwrite the existing boot.wim, say no. That is because my boot.wim is much better than the standard version)
    Last edited by SIW2; 28 Nov 2018 at 07:35.
      My Computer


  4. Posts : 6,162
    Win 7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
       #24

    Hi SIW2,

    DISM++

    Thanks for the reply and screenshots, they really helped.

    I have been mucking around with DISM++ and like it quite a lot. It can also let to change certain settings which is quite useful [I haven't done that but I have looked at it!]. The updating part of the process [running it several times because some updates have to be installed first] only takes about 52 minutes, whereas, using SIMPLIX takes about 180 minutes for a single image, and about 220 minutes for ALL images. Obviously these timings are on my machine.

    Just three obsevations:

    [1] During the integration of the updates process, there was only one update that was classed to be exclusive access. The update is KB3177467 [11-10-2016] and gave me the message With exclusive access, you will not be able to install other updates, until you restart the system. We suggest you install other updates first, then install this update last.. Well, I ran the scan for and Install updates several times. For each of those I clicked on Do not install (recommended). for the update KB3177467. On the last run, there was only upate KB3177467 left, this time I clicked on Go on installation.. Is this correct please?
    BTW, the update KB3177467 [Service Stack Update 2016] supersedes the previous update KB3020369 [which must be installed if you are going to install the convenience rollup]. I can't see why this is still needed!

    [2] I decided to click and include the Internet Explorer 11 for Windows 7 for x64-based systems update into the integration. This might, or might not have, caused the message below to appear. I just clicked OK when this appeared:

    Update your Win 7 installation media-dism-ie11.jpg

    [3] When I used imagex to export, compress, and get rid of any accumulated junk that was created during the integration of the updates [which it did indeed reduce the size of the install.wim], I noticed that it also updated four other files, install_Windows 7 HOMEBASIC.clg, install_Windows 7 HOMEPREMIUM.clg, install_Windows 7 HOMEPROFESSIONAL.clg and install_Windows 7 ULTIMATE.clg. I copied the install_Windows 7 HOMEPREMIUM.clg [which is the image I updated] to a folder and opened it with SIM [Windows System Image Manager]. I want to print this file out for curiosity. I tried SysExporter etc, but I couldn't get it to print. Is there anyway that you know of please that will allow me to print this catalogue file out?

    Thanks SIW2.
      My Computer


  5. Posts : 15,181
    Vista x64 / 7 X64
    Thread Starter
       #25

    7UPDATER v7 is on first post. The only changes are 3 new updates added and 3 superseded have been removed. That only applies if you select to download updates.
      My Computer


  6. Posts : 138
    Windows 7 Ultimate x86
       #26

    Greetings SIW2, tried v6 on x64 COEM, and here are a few questions for your kind attention:


    1. 7UPDATEv6.cmd could not find UpdatePatch-18.7.20.exe in the bin folder. Had to move it one level up.
    2. While the intel USB3 driver was installed, realtek lan and tplink wifi drivers failed.
    3. A total of 173 updates (about 700MB) were incorporated. But after installation, a further 100 updates were found by windows updates.
    4. The process created a bootiax64 file which appears to be same as the bootx64.efi provided by megahertzby. Is this meant for UEFI installation? Can the one found in win10 1803 be used?

    5. Could not get install.wim to stay below 4GB despite keeping just one image. Can a NTFS formatted USB thumb drive be used for UEFI installation?


    Appreciate if you could kindly point out what I may have done wrong.


    many thanks and best regards,
      My Computer


  7. Posts : 15,181
    Vista x64 / 7 X64
    Thread Starter
       #27

    realtek lan and tplink wifi drivers failed
    Did you install those by putting them in the drivers folder? Dism does the installation, the cmd file just makes it easier for you than typing commands yourself.
    4. The process created a bootiax64 file which appears to be same as the bootx64.efi provided by megahertzby. Is this meant for UEFI installation?
    Yes

    5. Could not get install.wim to stay below 4GB despite keeping just one image. Can a NTFS formatted USB thumb drive be used for UEFI installation?
    You will need a fat partition for efi boot. You can also have an ntfs partition for larger files. Or just split the wim.


    3. A total of 173 updates (about 700MB) were incorporated. But after installation, a further 100 updates were found by windows updates.
    173 sounds about right. You will always need to get some updates - graphics card driver, latest definitions for mse , net frame 4x is not native so is not updated (nf2 and 3.5 updates would have been). There are a few that are just pointless telemetry and upgrade to win10 stuff ( they weren't included), which you don't need. 100 sounds like a lot though. Maybe something to with your system.
      My Computer


  8. Posts : 6,162
    Win 7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
       #28

    Hi SIW2,

    I noticed that CreateISO wasn't included in v6 or v7. It's not a problem as I just copied it over. I just thought I would mention it. It might be useful if you could attach it to post #1 for those that are new to the thread. Just a suggestion!

    Would Usb7ice.zip work for creating both a Legacy - MBR and UEFI - GPT USB?
    I just thought it would be a good addition after running your excellent 7UPDATER tool [rather than running something like the Windows USB/DVD Download Tool or RUFUS]!

    Hi goopy,

    goopy said:
    1. 7UPDATEv6.cmd could not find UpdatePatch-18.7.20.exe in the bin folder. Had to move it one level up.
    Did you extract the files first?

    goopy said:
    3. A total of 173 updates (about 700MB) were incorporated. But after installation, a further 100 updates were found by windows updates.
    When I tested it, I used HOMEPREMIUM. I didn't tick any updates that weren't already ticked. On the first update run it gave me a total of 209 updates [some were ticked and some weren't]. On the second update run, it gave me a total of 95 updates [some were ticked and some weren't]. On the third update run, it gave me a total of 66 updates [some were ticked and some weren't]. In total, it installed [those that were ticked] 162 updates. I skipped the exclusive update KB3177467.
    Last edited by Paul Black; 20 Aug 2018 at 16:37.
      My Computer


  9. Posts : 15,181
    Vista x64 / 7 X64
    Thread Starter
       #29

    Would Usb7ice.zip work for creating both a Legacy - MBR and UEFI - GPT USB?
    Yes, but it isn't ultra fancy. Leaving fat32 selected will support both bios and efi boot. But fat32 has a max file of 4gb. If the install.wim is bigger, you would have to split the thing.
      My Computer


  10. Posts : 6,162
    Win 7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
       #30

    OK, thanks SIW2, I did think that, but I thought I would ask anyway .
      My Computer


 
Page 3 of 129 FirstFirst 1234513103 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:07.
Find Us