New
#351
Now another problem, creating ISO file..
See picture for more info.
Update your Win 7 installation media
-
-
-
New #353
OK, working.
Just some infor i saw
"memtest.efi" is not found in \boot ....
So may be something is deleted this file during whole process. If it`s not something to worry about, then i`m just saying.
-
New #354
BUt, overall i still don`t see my NVMe in the list of drives when install Win7.
SO i suspect that installation want some other driver, but i can`t see what is it
I forgot to say that the motherboard is AB350M (AM4)
-
New #355
Got this error now
CREATING WinRE.WIM...
[ERROR] There is already an image named "Microsoft Windows Setup (x64)" in the destination WIM
ERROR: Exiting with error code 11:
Tried to add an image with a name that is already in use.
Scanning "D:\7UPDATERv26\BIN\peshlx64\Windows" (loading as WIM path: "\Windows")...
44 bytes scanned (1 files, 8 directories)
Updating "\Windows\System32\winpeshl.ini" in WIM image
Using LZX compression with 1 thread
Archiving file data: 0 bytes of 0 bytes (0%) donee
using v26 the USB 3 support is now working but no selection menus to be installed - no cfg files for basic, premium, pro and ultimate
reran on fresh files and this time all of the cfg files are there this time - hope the usb 3 works again
-
New #356
That is because you already have winre.wim from a previous time you ran it.There is already an image named "Microsoft Windows Setup (x64)" in the destination WIM
-
New #357
Not critical as it has not happened again:
Had the same issue after rerunning the updater with no Selection Menu (installer can't continue) even though all files where there (ei.cfg.bak/home.basic.***.cfg and the others) so beginning to suspect bad copy from latest Win7-Ultimate ISO using that screwy UDF file system. Was able to mount the image and once mounted, copied files to hard drive but suspect something wrong.
Used the Gigabyte Tool and was successful - Was able to install Selected Win7 (Menus did show up)
Testing with Original Win7/SP1 install media (DVD) will see if the USB 3 and NVME updates work
Test Results:
No Menus but USB 3 does work - Will try again without NVME update
No menus w/o the NVME update
Suspect USB working due to recent firmware update - will test w/o ei.cfg file from instal dvd
No USB with plain Win7 Installer files. Really beginning to annoy me though I'm trying again with just USB 3 support, none of the 3.1 support from AMD or any NVME. Hoping to see a menu offering
Now I'm getting missing driver errors - indicating the DVD/CD is missing but suspect it's due to the 3.1 support screwing things up. AMD has really made it damn near impossible to get a working Win7 installation with any tools.
I'll have to see if I can use the Gigabyte patcher that folks says works well.Last edited by FastTurtle; 09 Jun 2019 at 08:49. Reason: Solved
-
New #358
Something went wrong...
Hello!
I wanted to try this installation media updater, I followed the steps described, but during the update process, a window shows up, saying: something went wrong.
I tried using a win10 and a win7 as the OS doing the update, same result.
Can you please help me what am I doing wrong, since the error message do not hold much information in it.
Edit: Currently i am using virtualbox to run WindowsLast edited by LordEndre; 13 Jun 2019 at 12:08. Reason: More information
-
New #359
That is a message from simplix downloader. Internet connection problem, possibly.
You can download directly download directly
The Updatepack needs to be next to 7UPDATER.cmd
-
Quote
Related Discussions