Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Software to Partition Legacy Drive

08 Sep 2018   #1
mchldpy

se7en x64 Enterprise
 
 
Software to Partition Legacy Drive

Hello,
My 3 MB's are from 2009. They must see the first partition starting on sector 63 not sector 2048. GParted will setup an MBR partition but starts the 1st partition on sector 2048 to be dcompatible with UEFI/GPT.
If I try to load any system on that partition scheme it gives a BCD/Boot config error at first boot but when the first partition starts at sector 63, I can install 7, 8.1 or 10. These are (non) 4K drives, I just need the right software.
Anyone know of any?

thanks in advance


My System SpecsSystem Spec
.
08 Sep 2018   #2
fireberd

Windows 10 64 bit
 
 

Don't know if this is what you need but give Mini Tool Partition Wizard a Try (free version).
Best Free Partition Manager for Windows | MiniTool Partition Free
My System SpecsSystem Spec
08 Sep 2018   #3
mchldpy

se7en x64 Enterprise
 
 

I will check it out, thanks. I was thinking it had to run through windows for some reason. Shouldn't have been thinking.

michael


UPDATE -
As far as I can tell after installing, it only works through windows. You can't put it on a disk and run it on a machine w/no os.
My System SpecsSystem Spec
.

08 Sep 2018   #4
billmcct

Windows 7 Home Premium
 
 

You will need an older version to create a boot disk. v7.6 and earlier had that option. It has been removed from the newer free versions and is only available in paid versions.
My System SpecsSystem Spec
08 Sep 2018   #5
mchldpy

se7en x64 Enterprise
 
 

Thanks for the mini tool heads up. I just got a 2007 copy of GParted and it set the first partition at sector 63 like my other 2 785 boards are but I got the same generic error at about 4% of the files copied. either some remnants of the partitionb alignment from before or that wasn't the (only) problem.
I think Rod Smith who wrote GPT fdisk has a program called "fixparts" that will clean up remnants of one or the other. Any more ideas would be great.

michael
My System SpecsSystem Spec
08 Sep 2018   #6
Megahertz07

Windows 7 HP 64
 
 

Are you sure you need specific disk partition to use on a GA-MA785GM?
Did you try to use M$ diskpart?
You boot from Win 7 installation disk, go to maintenance and launch a CMD window.
Diskpart (enter)

DISKPART> list disk
DISKPART> select disk (id)
DISKPART> clean
DISKPART> create partition primary
DISKPART> select part 1
DISKPART> active (if this is the boot partition)
DISKPART> format fs=ntfs label=(name) quick
DISKPART> assign letter (letter)
DISKPART> list volume
DISKPART> exit
My System SpecsSystem Spec
08 Sep 2018   #7
Paul Black

7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
 
 

Hi mchldpy,

Further to Megahertz07's excellent advice above.

You can use Diskpart from the X drive using this quick shortcut!
When you get to the first installer screen which shows Install now, press Shift + F10 to take you to the command prompt where you can run the diskpart commands.

Type Diskpart > Enter [to enter diskpart].
Type list disk > Enter[this lists all connected HDDs].
Type Select disk 0 > Enter [assuming that disk 0 is the desired disk for Windows to be installed on to].
Type Clean > Enter [this will erase the entire disk including ALL the partitions].

Now you can either carry on with the installation and setup your partitions and format in Where do you want to install Windows?, or, do as Megahertz07 has suggested and do all of it from within Diskpart!

I hope this helps!
My System SpecsSystem Spec
08 Sep 2018   #8
mchldpy

se7en x64 Enterprise
 
 

1) Not special but ol;der. First partition can't start on sector 2048, which everything wants to do for compatibility with the newer non BIOS mode and GPT.
That part is fixed thanks to a 2007 version of GParted.

I don't remember about DiskPart but the format tool on the install disk will put a hidden partition before your main partition for sensitive startup files and others and the first time you backup with Acronis or other 3rd party s/ware they don't see the hidden partition and your stuck. I don't think DiskPart does it because disk management from inside Windows doesn't.

(That) part is fixed, as I stated in my previous post I'm still getting an error.

Thanks to both for your knowledge.
My System SpecsSystem Spec
Reply

 Software to Partition Legacy Drive




Thread Tools




Similar help and support threads
Thread Forum
W7 won't install on partition. Disk drive partition problems
Hi, MSDN member. Primary OS is Windows 8.1 but I need to install a Windows 7 partition for testing. I've followed threads dealing with others also having problems but they've not solved mine. I've several SATA and one SSD HDD. Windows 8.1 is installed on SSD. I'm trying to install W7 + update 1...
Installation & Setup
Partition Manager. Primary Boot Partition as Secondary Drive.
I loaded a hard disk formatted as a Windows Primary Disk onto my SATA controller. The BIOS sees the disk. In this case I want to load the new disk as a secondary drive (of course I have booted with a different hard disk). I load the Partition Manager and inside I find that the partition manger does...
Hardware & Devices
Deleted C drive, system and MBR partition. Can't make new partition
I accidently deleted : - Drive C partition - System partition (100mb) - MBR partition when i was trying to install fresh windows 7. now i only have :
Installation & Setup
Hard Drive Partition Without Effecting Recovery Partition
Hi, Need some help. I recently bought Acer Aspire 5560G. It comes with 500GB HDD with only one partition which is drive C. There are 2 hidden partitions as well. I would like to split my drive C in 2 partitions without effecting my Recovery partition. Is it possible??? if yes than what's...
Performance & Maintenance
Should I delete legacy Recovery drive?
I am planning to perform a clean install of Win7 on my Dell Vista PC (as I understand this is better in the long term than an upgrade). My PC has a 10GB D: drive, which it came installed with, 'Recovery'. Is this something I should delete/format as part of the Win7 upgrade process (and will I...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:16.
Twitter Facebook Google+