Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 Pro x64 to Win 10 Upgrade: Error (0x8007042B - 0x2000D)

4 Weeks Ago   #1
illyminati

Windows 7 Professional x64
 
 
Win 7 Pro x64 to Win 10 Upgrade: Error (0x8007042B - 0x2000D)

Hi there,

I have upgraded 3 of 4 workstations from Win 7 to Win 10 so far but the 4th machine is killing me with the migration error in the title. I have not built the machine, so I don't know the history of it.

Specs: as seen in my profile.

- The system disk has (Crucial MX500 SSD) has 230 GB free space.

- The system reserved partition has sufficient space of over 500 MB - BUT: used space is only about 30 MB and the partition has a drive letter (F:). The other workstations had 90 MB used space and no drive letter for the system reserved partition.

--
The steps I went through so far after numerous failed installations (always at 27% progress):

- removed every peripheral but the mouse, keyboard and 1 display
- removed the second hard drive
- removed any third party antivirus
- removed any other software that is not essential for the workstation
- resized the system reserved partition from 100 to 600 MB
- ran AMD cleanup utility (there seemed to be another GPU installed before)
- updated the Nvidia Driver
- updated the Crucial Firmware
- ran system file check in safe mode (output: Windows Resource Protection found corrupt files but was unable to fix some of them)
- ran DISM but I guess /checkhealth and /restorehealth are no Win 7 features
- resetted windows update components and renamed SoftwareDistribution / Catroot2 / Migration folders

Upgrade is executed with MediaCreationTool 1909

SURT and SetupDiag logs are attached. I can't find a solution for the errors stated in the CheckSUR log or any Visual C++ 2005 SP1 Redistributable Package that could take me a step further.

Where am I? What is time?

Thanks in advance for your help and suggestions.


My System SpecsSystem Spec
.
4 Weeks Ago   #2
Megahertz07

Windows 7 HP 64
 
 

There is no SURT or SetupDiag logs attachments

Do the basic first. Open a CMD window as administrator and type:
chkdsk c: /f
It will say the disk is in use and if you want to schedule to next start = Yes
Restart

Back to windows, open a CMD window as administrator and type:
sfc /scannow

Report
My System SpecsSystem Spec
3 Weeks Ago   #3
illyminati

Windows 7 Professional x64
 
 

Hi @Megahertz07,

first of all, thanks for your reply.

I remember uploading a .rar file but anyway, I followed your steps and the logs should be attached now.


Attached Files
File Type: log CheckSUR.log (1.9 KB, 3 views)
File Type: log CheckSUR.persist.log (4.2 KB, 0 views)
File Type: rar CBS.rar (83.5 KB, 2 views)
File Type: log SetupDiagResults.log (1.6 KB, 2 views)
My System SpecsSystem Spec
.

3 Weeks Ago   #4
Megahertz07

Windows 7 HP 64
 
 

CheckSUR Found 11 errors and SetupDiag reports fatal migration plug-in failure.

Did you run chkdsk c: /f and sfc /scannow as instructed?
My System SpecsSystem Spec
3 Weeks Ago   #5
illyminati

Windows 7 Professional x64
 
 

Yes, I followed your instructions and ran chkdsk, restarted after the prompt and ran sfc. The output was still "Windows Resource Protection found corrupt files but was unable to fix some of them". The logs from 01/20/2020 are listed in the CBS.log (attached in the .rar).

I have read the CheckSUR and SetupDiag logs myself and after a deep search a Visual C++ 2005 SP1 Redistributable Package could be the solution but I am not sure if this is the case and if so, which redistributable is the right one.
My System SpecsSystem Spec
3 Weeks Ago   #6
Megahertz07

Windows 7 HP 64
 
 

The CBS.log has no errors.

To the "upgrde", did you run Setup.exe on the USB drive or did you extracted the iso files to a folder and ran Setup.exe ?
My System SpecsSystem Spec
3 Weeks Ago   #7
illyminati

Windows 7 Professional x64
 
 

I tried to upgrade with MediaCreationTool 1909 from the desktop (in place installation) like I did on the other 3 workstations.
My System SpecsSystem Spec
.
3 Weeks Ago   #8
Megahertz07

Windows 7 HP 64
 
 

All updates that you launch from running Windows is an in place installation. You can install downloading or download and then install. I prefer download and then install as you keep the installation disk
Lets try this.
- Create a USB boot able disk. You need a USB flash disk of 8G. It's not only for the installation but also for maintenance.
- If you don't have a a USB flash disk of 8G, download the iso, extract all files and folders to a folder and run setup (if you don't have, use 7zip) .
My System SpecsSystem Spec
3 Weeks Ago   #9
illyminati

Windows 7 Professional x64
 
 

Thanks for the suggestion. I'll give this a try and keep you updated.
My System SpecsSystem Spec
3 Weeks Ago   #10
illyminati

Windows 7 Professional x64
 
 

@Megahertz07

I tried two methods via USB flash:

1. Install with drivers etc. updates
2. Install without drivers etc. updates

Both methods were unsuccessfull and the system was reverted to Windows 7 with the same migration error.

By the way, a clean install like the solution in this thread is not an option.
My System SpecsSystem Spec
Reply

 Win 7 Pro x64 to Win 10 Upgrade: Error (0x8007042B - 0x2000D)




Thread Tools




Similar help and support threads
Thread Forum
Error (0x8007042B - 0x2000D) when attempting upgrade from Win 7 to 10
I am trying to upgrade a computer from Windows 7 Pro 64-bit to Windows 10: Dell Optiplex 9020 Windows 7 Pro 64-bit, SP 1 8 GB of RAM I updated all my drivers, via Dell Command Update before attempting the upgrade (except BIOS, which I tried to update twice and it failed...
Installation & Setup
Windows 10 update fail, error 0x800700003 - 0x2000d
I'm trying to upgrade from Windows 7 to Windows 10 using the media creation tool 1909 but each time I try I get the error 0x800700003 - 0x2000d the installation failed in the SAFE_OS phase with an error during MIGRATE_DATA operation. I googled the problem and tried a few suggested solutions but...
Installation & Setup
Error saying I cannot upgrade
The problem: I get 2 errors, stating that I cannot upgrade a 32 bit to a 64 bit, but also cannot upgrade a 64 bit to a 32 bit. I am guessing it has something to do with my "Program Files(x86)" folder. Is there a fix for this, or will I need to do a clean install? I didn't want it to wipe my...
Installation & Setup
ATI upgrade error
After following this guide, I went ahead and download the latest version of my display driver. I've got the ATI Radeon HD 3870 just FYI. When I opened the download and tried to install it, at about 1% of the installation my computer just immediately failed and restarted. I've tried it...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:51.
Twitter Facebook