Change active primary drive help please!

Page 1 of 2 12 LastLast

  1. Posts : 53
    W7
       #1

    Change active primary drive help please!


    Ever do anything stooopid? I seem to have a run going.

    In switching over from XP to 7 I found myself also buying almost all new components, except hard drives. Due to a number of events that no one would believe humanly possible, I managed to establish my "C:" and "D:" drives on hard drive 1, whereas hard drive 0 is a bunch of free space. The computer boots up to W7 on "C:" on HD 1.

    I want to switch cables on the SATA drives and then designate the new HD0 (which was HD1) as the primary active partition, but as we all know, I can't just switch cables as then the computer does not know to boot off HD0.

    What the heck do I do to accomplish this?
      My Computer

  2.    #2

    Please post a screenshot of your full Disk Management map using the Snipping Tool in Start>Programs menu, attaching it using paper clip in reply box.

    Your description is not at all clear, but here are some options based on what I can interpret:

    If you have System Active Windows 7 partition on Disk1 right now and you want it on Disk0, then Win7 already owns the boot and can be wherever it wants to be. Just swap the cables and make sure Disk0 is HD set to boot first in BIOS (after DVD).

    If Disk0 somehow got marked Active then you need to unplug it, plug its cable into the other drive, boot into Window 7 installer Repair console and run Startup Repair 3 times.

    We can say for sure after seeing the Disk Mgmt map
    Last edited by gregrocker; 29 Nov 2009 at 16:51.
      My Computer


  3. Posts : 28,845
    Win 8 Release candidate 8400
       #3

    brucemc777 said:
    Ever do anything stooopid? I seem to have a run going.

    In switching over from XP to 7 I found myself also buying almost all new components, except hard drives. Due to a number of events that no one would believe humanly possible, I managed to establish my "C:" and "D:" drives on hard drive 1, whereas hard drive 0 is a bunch of free space. The computer boots up to W7 on "C:" on HD 1.

    I want to switch cables on the SATA drives and then designate the new HD0 (which was HD1) as the primary active partition, but as we all know, I can't just switch cables as then the computer does not know to boot off HD0.

    What the heck do I do to accomplish this?
    Bruce Hi and welcome to the club

    I cant tell you how many I have done. Im not sure because I am not expert with it, but I think you can use something like bcdedit to edit the boot. instructions for it here BCDEDIT - How to Use I am sure that one of our resident guru users (you know who you are) will be by but take a look at the instructions in case

    Kenn J++
      My Computer


  4. Posts : 1,031
    Windows 7 x64
       #4

    Can you not reinstall Win 7 on the other hard drive.

    If you have stuff you do not want to loose, you can probably image the partition and transfer that to the new drive. I am not sure where you would need to put the image, unless you have an external drive.

    But, as was stated, your exact situation is a little confusing.
      My Computer


  5. Posts : 53
    W7
    Thread Starter
       #5

    I dug myself in a lot deeper-

    Sometimes in Windows Disk Manager the drive with C:, D:, & E: would show up as Drive 0, and other times it would show up as Drive 1. Really.

    And then I extremely messed up by deleting a partition that turned up to be the wrong partition and now I need to find some dang utility I can boot up with before I do more damage, so I can try to recover files on one of the deleted partitions, as though 6 or so months ago I did a back-up, thatas all the family pictures.

    I had resolved to copying those pictures over to the hard drive with all the spacem then formatting away the entire other hard drive, then simply reinstalling the OS, but somewhere along the way I really stepped in it.

    Any suggestions for a bootable utility to restore partitions and files thereon???
      My Computer

  6.    #6

    Too bad you couldn't have posted your Disk Management as requested as we could have easily helped you around these self-imposed disasters.

    I'm not sure why you would ask for help and then go deleting partitions without even responding.

    There is no need to reinstall WIndows 7 if you are satisfied with its performance.

    Just look at Win7 in Disk Management and see if it says System Active. If so, it is okay to swap to Disk0 either by switching cables then changing boot order in BIOS, or leaving alone.

    Post a new topic asking for Urgent Data recovery (family Pictures). There are good free apps but they need to be searched, and those who already know how to use them.
    Last edited by gregrocker; 29 Nov 2009 at 16:53.
      My Computer


  7. Posts : 1,031
    Windows 7 x64
       #7

    The drive does not change from Drive 0 to Drive 1 unless you change the cables, or the drive order in the bios or boot using only one drive which changes the drive order in the bios for you. If you have a dual boot with two drives, drive letters will change, but not the Drive 0 or 1.

    Only connect one drive at a time untill you figure out what you want. I would connect the empty drive, install Win 7 on it and then reconnect the other drive so you can get the data off it. This assumes I even have the slightest idea of your current situation.
      My Computer


  8. Posts : 53
    W7
    Thread Starter
       #8

    Yep, that "changing the cable" thing was in there, along with being ticked off at W7 64 bit so I thought I would reinstall WXP Pro. I ran WXP's installation routine and instead of installing over the W7 installation, I selected to format the C: drive and install it like I have done countless times already over the last week, and it installed to the second hard drive instead of the first, which at the time was the first, or something like that. I would like to get drunk now, as the stress levels are rather high, but I suspect that will only make matters worse (though I am not too sure if they really can be). So now, though it will risk the data recovery, I am reinstalling W7 where I believe it originally was, will install Acronis Disk Director, and see if anything in the charred remains is recoverable.

    You might read about me in the morning paper, depending on how I handle the next couple hours...
      My Computer

  9.    #9

    Why will you not follow any advice given here?

    I have never seen anything quite like this.

    We are trying to help you, and your reponses completely ignore any advice given.

    Instead, in the time several have offered suggestions you have flushed your family pictures and reinstalled both OS's willy-nilly with no conceivable logic.
      My Computer


  10. Posts : 53
    W7
    Thread Starter
       #10

    If anyone dares say "At least you still got your health"...

    I love all the advice given here, really. My idiot problem is I am an anxiety case and already did the damage before anyone had a chance to reply. Now, I can explain the "logic", but that would be superfluous at this point. I know I should have slowed down, but without question W7 64 bit Ultimate reported different configurations of the exact same setup in several instances. I suspect it was my error in wrongly assessing the drives by size that laid waste to the pictures, and though bloodied in that last battle, the war is not over.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:56.
Find Us