Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Turns off during booting after install

30 Nov 2009   #1

Windows 7 Professional x64
Turns off during booting after install

I just put my new PC together today. I installed Windows 7 ok, went to restart, and about 10 seconds after the Windows logo comes up, it all turns off.

Components are...
CPU: i5-750
RAM: Kingston DDR3-2000 4GB
PSU: Enermax Infiniti 650w

My System SpecsSystem Spec
30 Nov 2009   #2

7600.20510 x86

Adjust your bios as follows:

Set the Plug and Play OS to yes.

Look up the timings and Vdimm of your RAM on the manufacturer's page. Set bios accordingly.
My System SpecsSystem Spec
30 Nov 2009   #3

Windows 7 Professional x64

I am not sure about the P&P OS setting, but I set the RAM to XMP, and I am getting further than what I was :) Your a legend!
My System SpecsSystem Spec

30 Nov 2009   #4
Microsoft MVP



Also, Kingston is the best RAM vendor for tech support. They help set, test and troubleshoot RAM and replace it if any question. Call them for anything.
My System SpecsSystem Spec

 Turns off during booting after install

Thread Tools

Similar help and support threads
Thread Forum
My screen turns black after the recommended intel hd graphics install
Help, I have been trying to solve this issue for some time now, the problem is that my screen turns black on startup after the microsoft recommended graphics driver installation? what do I do?:(:(
Graphic Cards
Windows 7 Install, Display turns off during setup, no VGA signal
This is boggling my mind and I can't seem to find many solutions to it. I'm working on a Toshiba Tecra A11 w/Nvidia NVS dedicated graphics, new SSD and 8 gb RAM. Laptop and screen power on and I can enter BIOS, Ram+HD detected I start Windows 7 install from USB drive, it does the loading...
Installation & Setup
computer turns on for a few seconds then turns off
okay so i am able to turn my computer on for a few seconds but then it automatically shuts itself off after a few seconds but the thing is after letting it sit for a couple seconds it says something about how the clocks on my processor have been overclocked too high and asks if it wants me to...
General Discussion
PC turns off while booting
I recently changed my PC's power supply, but when I arrived home and turned it on, it turned off by itself a few minutes after booting the OS. Now every time I turn it on, after a few minutes it powers down again while booting. Any help? What more information should I give?
Hardware & Devices
PC turns off suddenly when booting
Sometimes when I power-up my pc everything goes on (fans, HDDs, MOBO..) 2-3 sec later it shuts (won't even get to the bios boot screen) then few seconds later it will turn itself on and stay on (log into windows..) As I stated before it happens sometimes, any suggestion?
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:10.
Twitter Facebook Google+